Educational, Healthcare and Commercial Sanitaryware
Need Help? Call us : 01924 457600
Wall-mounted TRAPEZ washbasin
Ref. 120270
Ref. 121270
Wall-mounted washbasin, 600x505mm.
Shallow washbasin suitable for people with reduced mobility.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5.5kg.
TEMPOMATIC 4 electronic tap
Ref. 44000015
Deck-mounted electronic basin tap:
230/6V recessed mains supply.
Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 sec. every 24h after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
Cap fixed in place by two concealed screws.
PEX flexible with stopcock, filter and Ø 15mm conical inlet.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
10-year warranty.
FINO wall-hung urinal
Ref. 135110
Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed horizontal or exposed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with a 1½” P trap. Supplied with fixing elements.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 3.5kg.
SECURITHERM thermostatic basin mixer
Ref. H9600610
Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
Securitouch thermal insulation prevents burns.
No non-return valve on the inlets.
Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
Spout and body with smooth interiors and low water volume.
Flow rate regulated at 7 lpm.
No manual contact thanks to Hygiene control lever L. 146mm.
Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
Reinforced fixing via 2 stainless steel rods.
10-year warranty.
BINOPTIC electronic tap
Ref. 379ENC15
Recessed electronic basin tap:
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 sec. every 24h after last use).
Active, infrared movement detection, sensor at the end of the spout optimises detection.
Filter, solenoid valve and Ø 15mm conical inlet.
Chrome-plated solid brass body.
Chrome-plated spout L. 200mm for recessed installation.
Anti-blocking safety.
Spout with a smooth interior and low water volume (limits bacterial niches).
10-year warranty.
From our best selling range of washroom packs, this convenient Low Level Toilet Pack includes:
BINOPTIC electronic tap
Ref. 38801515
Deck-mounted electronic basin tap:
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexible with filter and solenoid valve Ø 15mm.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low volume of water (reduces bacterial development).
Drop height: 170mm for semi-recessed washbasins.
Suitable for people with reduced mobility.
10-year warranty.
From our best selling range of washroom packs, this convenient Back to Wall Toilet Pack includes:
Wall-mounted eye wash station
Ref. 9102
Wall-mounted eye wash station with manual control includes:
304 stainless steel basin Ø 250mm, green powder-coated finish.
Two spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
1/4-turn, nickel-plated brass valve opens and closes quickly.
Water flow is activated by the hand control. The eye wash will continue to operate when the hand control is released. The water flow will stop when the hand control is pulled towards the user.
Flow rate 20 lpm at 3 bar.
Aerators with stainless steel double filters.
Water supply M1/2″.
Pipework made from galvanised steel, grey powder-coated finish.
Hand control made from galvanised steel, green powder-coated finish.
Wall-mounted on a brass plate (screws not included.)
Supplied with identification sign for first aid equipment: “Eye Wash”.
10-year warranty.
SHA 700 squat WC pan
Ref. 113610
Floor-recessed squat WC pan, 700 x 220 x 700mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness 1.2mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
Bowl shape suitable for male and female use.
Non-slip foot area.
Vertical waste outlet: Ø 100mm.
Flushing system with one 304 stainless steel spreader.
Weight: 6kg.10-year warranty.
This Doc M pack is designed to provide a toilet facility with additional support for the user.
The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.
HIGHFLOW high-speed hand dryer
Ref. 510622S
HIGHFLOW air pulse hand dryer.
Robust model.
Lit central nozzle focuses the pulsed air onto hands at over 230km/h.
High speed: dries in 10 -15 seconds.
Choice of warm or cool air via a concealed switch.
Infrared automatic activation.
Intelligent technology: stops automatically when hands are removed.
Anti-blocking: stops automatically if used continuously for more than 60 seconds.
Bacteriostatic polished satin 304 stainless steel.
Easy to clean: one-piece cover.
Stainless steel thickness: 1mm.
Dimensions: 175 x 238 x 267mm.
Weight: 4kg.
Airflow: 39 l/second.
Air speed: 230km/h.
Low energy consumption: 1,350W.
220-240V~ / 50 Hz.
Noise level: 70 dBA.
Class I, IPX1.
CE marked.
3-year warranty.
HIGHFLOW high-speed hand dryer
Ref. 510622W
HIGHFLOW air pulse hand dryer.
Robust model.
Lit central nozzle concentrates pulsed air onto hands at 230km/h.
High speed: dries in 10 to 12 seconds.
Choice of warm or cold air via concealed switch.
Infrared automatic activation.
Intelligent technology: stops automatically when hands are removed.
Anti-blocking: stops automatically if used continuously for more than 60 seconds.
Bacteriostatic 304 stainless steel.
Easy to clean: one-piece cover.
Stainless steel thickness: 1mm.
Dimensions: 175 x 238 x 267mm.
Weight: 4kg.
Airflow: 39 l/second.
Air speed: 230km/h.
Low energy consumption: 1,350W.
220-240V~ / 50 Hz.
Noise level: 70 dBA.
Class I, IPX1.
CE marked.
3-year warranty.
BOB TC washbasin
Ref. 160130
Wall-mounted washbasin with through-the-wallinstallation for service ducts.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 5.5kg.
This light grey toilet cubicle door from the Pendle range is framed by light grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments. The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.
The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.
Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)
This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.
Box A includes:
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.
The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.
The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.
Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)
This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.
Box A includes:
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Suitable for both wet and dry environments
The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.
The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.
Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)
This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.
Box A includes:
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.
The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.
The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.
Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)
This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.
Box A includes:
Stone Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
COMPANY INFORMATION
01924 457600
Mon-Thursday 8.30am – 5pm
Friday: 8.30am – 3pm
OUR POLICIES
SECURE PAYMENTS BY
Registered in England: 06851971 | VAT no. 380618882 | © Plumbware.co.uk Ltd 2009 - 2026
