Plumbware.co.uk - Product Range

Delabie 700mm Squat WC Pan Without Trap

£381.00 ex VAT

SHA 700 squat WC pan
Ref. 113610

Floor-recessed squat WC pan, 700 x 220 x 700mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness 1.2mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
Bowl shape suitable for male and female use.
Non-slip foot area.
Vertical waste outlet: Ø 100mm.
Flushing system with one 304 stainless steel spreader.
Weight: 6kg.10-year warranty.
Delabie Control plate for TEMPOMATIC 4 for urinals 430016

£352.80 ex VAT

Control plate for TEMPOMATIC 4 for urinals

Ref. 430016

TEMPOMATIC 4 electronic valve F½”, kit 2/2.
Battery-operated with 123 Lithium 6V batteries.
Solenoid valve enables opening and closing of water.
Chrome-plated finish stainless steel wall plate 145 x 145mm with integrated electronics.
Shock-resistant infrared presence detection sensor.
Detection delay is 10 seconds.
3 programmes (rinsing volume can be adjusted according to urinal type).
High frequency mode (exclusive to DELABIE):
– Short rinse after each user.
– Additional rinse after the period of increased frequency of use.
Hygienic duty flush every 24 hours (can be adjusted to 12 hours or OFF) after last use: prevents vaccums.
Flow rate pre-set at 0.15 L/sec at 3 bar, can be adjusted.
TEMPOMATIC 4 F½” valve compatible with sea water, rain water and grey water.
Installation in waterproof housing with waterproof collar, transformer, filter and stopcock.
Suitable for people with reduced mobility.
10-year warranty.Order with frame system references 543006 for urinals Ø 35mm, 543006D for urinals with flexible ½” or with recessed housing 430PBOX.
Delabie Control plate for TEMPOMATIC 4 for urinals 430006

£352.80 ex VAT

Recessed Control plate for TEMPOMATIC 4 for urinals

Ref. 430006

TEMPOMATIC 4 electronic valve F½”, kit 2/2.
Battery-operated with CR 123 Lithium 6V batteries.
Solenoid valve enables opening and closing of water.
Satin finish stainless steel wall plate 145 x 145mm with integrated electronics.
Shock-resistant infrared presence detection sensor.
Detection delay is 10 seconds.
3 programmes (rinsing volume can be adjusted according to urinal type).
High frequency mode (exclusive to DELABIE):
– Short rinse after each user.
– Additional rinse after the period of increased frequency of use.
Hygienic duty flush every 24 hours (can be adjusted to 12 hours or OFF) after last use: prevents vaccums.
Flow rate pre-set at 0.15 L/sec at 3 bar, can be adjusted.
TEMPOMATIC 4 F½” valve compatible with sea water, rain water and grey water.
Installation in waterproof housing with waterproof collar, transformer, filter and stopcock.
Suitable for people with reduced mobility.
10-year warranty.Order with frame system references 543006 for urinals Ø 35mm, 543006D for urinals with flexible ½” or with recessed housing 430PBOX.
Delabie Control plate for TEMPOMATIC 4 for urinals 430026

£352.80 ex VAT

Control plate for TEMPOMATIC 4 for urinals

Ref. 430026

TEMPOMATIC 4 electronic valve F½”, kit 2/2.
Battery-operated with CR 123 Lithium 6V batteries.
Solenoid valve enables opening and closing of water.
White powder-coated stainless steel white wall plate 145 x 145mm with integrated electronics.
Shock-resistant infrared presence detection sensor.
Detection delay is 10 seconds.
3 programmes (rinsing volume can be adjusted according to urinal type).
High frequency mode (exclusive to DELABIE):
– Short rinse after each user.
– Additional rinse after the period of increased frequency of use.
Hygienic duty flush every 24 hours (can be adjusted to 12 hours or OFF) after last use: prevents vaccums.
Flow rate pre-set at 0.15 L/sec at 3 bar, can be adjusted.
TEMPOMATIC 4 F½” valve compatible with sea water, rain water and grey water.
Installation in waterproof housing with waterproof collar, transformer, filter and stopcock.
Suitable for people with reduced mobility.
10-year warranty.Order with frame system references 543006 for urinals Ø 35mm, 543006D for urinals with flexible ½” or with recessed housing 430PBOX.
Delabie SECURITHERM Thermostatic Basin Mixer

£353.00 ex VAT

SECURITHERM thermostatic basin mixer
Ref. H9600610

Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
Securitouch thermal insulation prevents burns.
No non-return valve on the inlets.
Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
Spout and body with smooth interiors and low water volume.
Flow rate regulated at 7 lpm.
No manual contact thanks to Hygiene control lever L. 146mm.
Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
Reinforced fixing via 2 stainless steel rods.
10-year warranty.
Back to Wall Ambulant WC Pack, Steel Grab Rails. Exposed Fixings

£354.00 ex VAT

Product Description

This Doc M pack is designed to provide a toilet facility with additional support for the user.
The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.
Delabie BOB TC Washbasin

£390.00 ex VAT

BOB TC washbasin
Ref. 160130

Wall-mounted washbasin with through-the-wallinstallation for service ducts.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 5.5kg.
Be-Line drop-down support rail with leg, L. 650mm, anthracite

£363.83 ex VAT

Be-Line drop-down support rail with leg, L. 650mm, anthracite

Ref. 511962C

Be-Line drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCs or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of bars in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for disabled people.
Drop-down rail retained in upright position. Slowed down descent.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Metallised anthracite powder-coated aluminium finish provides a good visual contrast with light-coloured walls.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 650 x 825 x 120mm.
Leg height can be adjusted from 760 – 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Drop-down rail with 30-year warranty.
CE marked.
Be-Line drop-down support rail with leg, L. 650mm, white

£363.83 ex VAT

Be-Line drop-down support rail with leg, L. 650mm, white

Ref. 511962W

Be-Line drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCS or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of bars in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for disabled people.
Drop-down rail retained in upright position. Slowed down descent.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte white powder-coated aluminium finish provides a good visual contrast with dark walls.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Leg provides additional reinforcement when wall fixings are not enough.
Dimensions: 650 x 825 x 120mm.
Leg height can be adjusted from 760 – 780mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Drop-down rails with 30-year warranty.
CE marked.
Pendle CGL plain grey toilet cubicle door pack with plain grey pilasters BOX A

£365.00 ex VAT
Pendle CGL Cubicle Door Pack (Box A)

Pendle plain grey toilet cubicle door pack with plain grey pilasters

This light grey toilet cubicle door from the Pendle range is framed by light grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments. The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

Box A includes:
- Door (1800 x 950mm)
- End Pilasters (1800 x 150mm)
- Lock & Latch with Outward Opening Adaptor
- Hinge Channel, Head Rail and fittings
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
Pendle CGL plain grey toilet cubicle door pack with stone grey pilasters BOX A

£365.00 ex VAT
Pendle CGL Cubicle Door Pack (Box A)

Pendle plain grey toilet cubicle door pack with stone grey pilasters

From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.

The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

Box A includes:
- Door (1800 x 950mm)
- End Pilasters (1800 x 150mm)
- Lock & Latch with Outward Opening Adaptor
- Channels, Head Rail and fittings
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
Pendle CGL Stone grey toilet cubicle door pack with stone grey pilasters BOX A

£365.00 ex VAT
Pendle CGL Cubicle Door Pack (Box A)

Pendle Stone Grey toilet cubicle door pack with Stone Grey pilasters

From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Suitable for both wet and dry environments

The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

Box A includes:
- Door (1800 x 950mm)
- End Pilasters (1800 x 150mm)
- Lock & Latch with Outward Opening Adaptor
- Channels, Head Rail and fittings
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
Pendle CGL Stone grey toilet cubicle door pack with plain grey pilasters BOX A

£365.00 ex VAT
Pendle CGL Cubicle Door Pack (Box A)

Pendle Stone Grey toilet cubicle door pack with Plain Grey pilasters

From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.

The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

Box A includes:
- Door (1800 x 950mm)
- End Pilasters (1800 x 150mm)
- Lock & Latch with Outward Opening Adaptor
- Channels, Head Rail and fittings
Stone Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
Pendle CGL white toilet cubicle door pack with white pilasters BOX A

£365.00 ex VAT
Pendle CGL Cubicle Door Pack (Box A)

Pendle white toilet cubicle door pack with white pilasters

From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.

The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

Box A includes:
- Door (1800 x 950mm)
- End Pilasters (1800 x 150mm)
- Lock & Latch with Outward Opening Adaptor
- Channels, Head Rail and fittings
Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack
Delabie FINO WF Water-Free Urinal

£396.00 ex VAT

FINO WF water-free urinal
Ref. 135010

Wall-hung individual water-free urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Recessed horizontal waste outlet.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
1½” waste outlet.
Supplied with a silicone membrane to prevent bad smells.
Supplied with fixing elements.
Weight: 3.5kg.
Delabie FRAJU PMR Washbasin

£368.00 ex VAT

FRAJU PMR washbasin
Ref. 120440

Wall-mounted washbasin, 620x505mm.
Suitable model for people with reduced mobility.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 5kg.
Delabie FINO Wall-Hung Urinal Recessed Water Inlet

£374.00 ex VAT

FINO wall-mounted urinal
Ref. 135710

Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Rear water inlet (recessed).
Recessed or exposed horizontal waste outlet. Concealed trap.
Quick and easy to install to from the front thanks to a stainless steel mounting frame.
Supplied with a 11/2″ P trap. Supplied with fixing elements.
CE marked. Complies with European standard EN 13407 for a 2 litre flush.
Weight: 3.5kg.
Be-Line drop-down support rail, L.850 mm, matte black

£377.06 ex VAT

Be-Line drop-down support rail, L. 850 mm, matte black

Ref. 511964BK

Be-Line® drop-down support rail for people with reduced mobility.
In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCs or showers.
Allows side access in the raised position.
Removable: easy to remove with anti-theft locking system. Reduces the number of bars in a facility, allowing installation only when required.
Example: hotels or hospitals providing short-term accommodation for disabled people.
Drop-down rail retained in upright position. Slowed down descent.
Aluminium tube.
Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
Matte black powder-coated aluminium finish provides a good visual contrast with light-coloured walls.
Uniform surface for easy maintenance and hygiene.
Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 850 x 825 x 120mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
Drop-down rail with 30-year warranty.
CE marked.
Delabie TEMPOMIX Shower Kit

£412.00 ex VAT

TEMPOMIX shower kit
Ref. 796209

Time flow shower kit for cross wall installation:
TEMPOMIX 3/4″ single control mixer.
For walls ≤ 220mm.
Temperature control and operation via the push-button.
Maximum temperature limiter (adjustable by the installer).
Ligature-resistant collar.
Soft-touch operation.
Time flow ~30 seconds.
Flow rate 6 lpm at 3 bar.
Chrome-plated ROUND shower head, tamperproof with scale-resistant nozzle and automatic flow rate regulation.
Integrated non-return valves and filters.
Chrome-plated metal push-button.
Threaded rods can be cut-to-size.
10-year warranty.
Delabie BINOPTIC Electronic Tap 250mm

£413.00 ex VAT

BINOPTIC electronic tap
Ref. 39801515

Deck-mounted electronic basin tap:
Independent IP65 electronic control unit.
230/12V mains supply with transformer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Adjustable duty flush (pre-set flush 60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated brass body.
PEX flexible with filter and solenoid valve Ø 15mm.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking security.
Spout with smooth interior and low water volume (reduces bacterial development).
Drop height 250mm, for countertop wasbasins.
Suitable for people with reduced mobility.
10-year warranty.

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Control plate for TEMPOMATIC 4 for urinals

Ref. 430016

Recessed Control plate for TEMPOMATIC 4 for urinals

Ref. 430006

Control plate for TEMPOMATIC 4 for urinals

Ref. 430026

Product Description

Ref. 511962C

Be-Line drop-down support rail with leg, L. 650mm, white

Ref. 511962W

Pendle CGL Cubicle Door Pack (Box A)

Pendle plain grey toilet cubicle door pack with plain grey pilasters

Pendle CGL Cubicle Door Pack (Box A)

Pendle plain grey toilet cubicle door pack with stone grey pilasters

Pendle CGL Cubicle Door Pack (Box A)

Pendle Stone Grey toilet cubicle door pack with Stone Grey pilasters

Pendle CGL Cubicle Door Pack (Box A)

Pendle Stone Grey toilet cubicle door pack with Plain Grey pilasters

Pendle CGL Cubicle Door Pack (Box A)

Pendle white toilet cubicle door pack with white pilasters

Be-Line drop-down support rail, L. 850 mm, matte black

Ref. 511964BK

FREQUENTLY ASKED QUESTIONS

YOUR ONE STOP SHOP FOR COMMERCIAL WASHROOM SOLUTIONS

Title

Share Cart

Save Cart