• Wall-mounted toilet brush set with lid
    Ref. 4051EW

    Wall-mounted toilet brush set with lid.
    Bacteriostatic 304 stainless steel. White powder-coated finish.
    Wall-mounted model with anti-theft lock for fixing.
    Robust model.
    Easy to clean: plastic bowl can be removed from above.
    Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
    Toilet brush automatically centres itself in the holder.
    Stainless steel body 1mm thick.
    Dimensions: Ø 90 x 410mm.
    10-year warranty.

  • Wall-mounted 304 stainless steel bin, 38 litres
    Ref. 510463S

    Wall-mounted, rectangular bin for paper towels and paper towels.
    Robust model.
    1mm thick.
    Bacteriostatic 304 stainless steel.
    Capacity 38 litres.
    Polished satin 304 stainless steel.
    Stainless steel thickness: 1mm.
    Dimensions: 160 x 400 x 590mm.
    10-year warranty.

  • Wall-mounted paper towel dispenser, for 500 sheets
    Ref. 510601P

    Wall-mounted paper towel dispenser.
    Dispenses one sheet at a time, suitable for most paper towels.
    With lock and standard DELABIE key.
    Level control.
    Capacity: 500 sheets.
    Bright polished 304 bacteriostatic stainless steel.
    Dimensions: 120 x 275 x 360mm.
    Pack of 180 interfolded paper towels can be ordered separately (ref. 6606).
    Paper towel dimensions: open 230 x 250mm, folded 115 x 250mm.
    10-year warranty.

  • HEMI inset round washbasin Ø 385mm
    Ref. 120490

    Round washbasin for recessed installation from above or below.
    Basin internal diameter: 385mm.
    Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.6kg.

  • TEMPOMATIC 4 electronic tap
    Ref. 44000015

    Deck-mounted electronic basin tap:
    230/6V recessed mains supply.
    Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 sec. every 24h after last use).
    Active, infrared presence detection, sensor at the end of the spout optimises detection.
    Chrome-plated solid brass body.
    Cap fixed in place by two concealed screws.
    PEX flexible with stopcock, filter and Ø 15mm conical inlet.
    Fixing reinforced by 2 stainless steel rods.
    Anti-blocking safety.
    10-year warranty.

  • Floor-standing disposal sink
    Ref. 180150

    Floor-standing disposal sink.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.0mm.
    One-piece pressed bowl, seam-free.
    Smooth surface is easy to clean.
    Adjustable feet height up to 40mm.
    Supplied with 1½” waste. Without overflow.
    Hinged stainless steel bucket grid.
    Weight: 10.6kg.

  • DESCRIPTION

    Floor-standing ILHA drinking fountain
    Ref. 180100

    Floor-standing drinking fountain.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 0.8mm.
    Height: 915mm.
    Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
    Flat perforated waste, without screws:easy to clean and vandal-resistant.
    Recessed vertical water outlet. Waste outlet 1¼”.
    Supplied with fixing elements.
    Weight: 9.6kg.

  • HEMI inset round washbasin Ø 310mm
    Ref. 120471

    Round basin for recessed installation from above or below.
    Basin internal diameter: 310mm.
    Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Bright polished finish.
    Stainless steel thickness: 0.8mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.5kg.

  • Wall-mounted wash trough.

    1800mm wide (see spec drawing)
    3 posts.
    MINERALCAST: composite material consisting of natural mineralsand polyester resin.
    Ideal for use in public and commercial places.
    Uniform, non-porous surface is easy to clean.
    One-piece cast washbasin, seam-free, for easy maintenanceand better hygiene.
    Pleasant to the touch.
    With no tap hole.
    Supplied with 1½” waste. Without overflow.
    Supplied with fixing elements.
    White, RAL 9016.
    Weight: 90kg.
    MINERALCAST pedestals in anthracite also available, sold individually

  • Wall-mounted eye wash station
    Ref. 9102

    Wall-mounted eye wash station with manual control includes:
    304 stainless steel basin Ø 250mm, green powder-coated finish.
    Two spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
    1/4-turn, nickel-plated brass valve opens and closes quickly.
    Water flow is activated by the hand control. The eye wash will continue to operate when the hand control is released. The water flow will stop when the hand control is pulled towards the user.
    Flow rate 20 lpm at 3 bar.
    Aerators with stainless steel double filters.
    Water supply M1/2″.
    Pipework made from galvanised steel, grey powder-coated finish.
    Hand control made from galvanised steel, green powder-coated finish.
    Wall-mounted on a brass plate (screws not included.)
    Supplied with identification sign for first aid equipment: “Eye Wash”.
    10-year warranty.

  • TEMPOMATIC Electronic tap
    Ref. 44115715

    Cross wall electronic basin tap:
    Independent IP65 electronic control unit.
    230/12V mains supply with transformer.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Adjustable duty flush (pre-set flush ~60 sec. every 24h after last use).
    Shockproof infrared presence detection sensor for wall ≤ 165mm.
    Anti-blocking safety.
    Solenoid valve with filter and Ø 15mm conical inlet.
    Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
    Threaded rods can be cut to size.
    10-year warranty.

    TEMPOMATIC Electronic tap
    Ref. 44115715

    Cross wall electronic basin tap:
    Independent IP65 electronic control unit.
    230/12V mains supply with transformer.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Adjustable duty flush (pre-set flush ~60 sec. every 24h after last use).
    Shockproof infrared presence detection sensor for wall ≤ 165mm.
    Anti-blocking safety.
    Solenoid valve with filter and Ø 15mm conical inlet.
    Chrome-plated fixed spout L. 170mm for wall ≤ 165mm with anti-rotating pin.
    Threaded rods can be cut to size.
    10-year warranty.

  • Wall-mounted BOB washbasin
    Ref. 120130
    Ref. 121130

    Wall-mounted washbasin.
    Basin internal diameter: 310mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    Vandal-resistant: shrouded basin, concealed trap.
    Quick and easy to install from the front thanksto a stainless steel mounting frame.
    Supplied with 1 ¼” waste and trap.
    With tap hole Ø 35mm on right side.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 5.5kg.

  • KOMPACT washbasin and floor-standing WC combination
    Ref. 160800

    Combination unit: washbasin and floor-standing central WC panwith recessed toilet roll holder.
    Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel unit thickness: 2mm.
    Rounded corners and edges for improved safety.
    Smooth surface for easy cleaning.
    Suitable for prisons, police stations, etc.
    WC pan is completely welded to washbasin, no screws:
    makes cleaning easier and prevents concealment of objects.
    WC pan central to the unit.
    Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2″.
    WC equipped with time flow flush valve, 7 second time flow, M3/4″.
    Water inlet: washbasin M1/2″, WC M3/4″.
    Recessed horizontal water outlet: Ø 100mm.
    Supplied with washbasin siphon.
    Easy to install: only one water outlet for both washbasin and WC,water inlet and outlet already connected.
    Weight: 36kg.

  • Eye wash and safety shower combination
    Ref. 9203

    Free-standing eye wash and safety shower combination with manual or foot control includes:
    Frost-free system as standard.
    304 stainless steel basin Ø 250mm with green finish.
    Eye wash spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
    Flow rate 20 lpm at 3 bar, aerators have stainless steel double filters.
    Circular shower head Ø 250mm in green, shock-resistant ABS.
    Flow rate 70 lpm at 1 bar dynamic pressure (120 lpm at 3 bar dynamic pressure).
    Water supply F1″.
    Pipework made from galvanised steel, grey powder-coated finish. Triangular pull handle in green powder-coated brass. Hand and foot controls in green powder-coated galvanised steel.
    Fixed to the floor by a brass base plate (screws not included).
    Supplied with identification signs for first aid equipment: “Safety Shower” and “Eye Wash”.

    Operation:
    1/4-turn, nickel plated brass valves open and close quickly.
    Simultaneous Eye Wash and Shower:
    Water flows simply by pulling on the triangular handle.
    The flow will continue even when the handle is released.
    The flow will stop when the handle is returned to its original position.
    Eye Wash only:
    Water flow is operated by the foot pedal or the hand control. The eye wash will continue to flow when the pedal or hand control is released.
    The water flow will stop when the hand control is pulled towards the user or the foot pedal is raised.
    10-year warranty.
    The water does not shut off automatically, allowing the injured person to have both hands free (to remove their clothing, keep their eyes open, etc.).

  • SECURITHERM shower panel
    Ref. H963615

    SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
    SECURITHERM sequential thermostatic mixer (non-time flow).
    Temperature control from cold water up to 39°C.
    Temperature limiter set at 39°C, can be adjusted.
    Anti-scalding failsafe: automatic shut-off if cold or hot water supply fails.
    Thermal shocks are possible.
    Flow rate 9 lpm at 3 bar.
    Sliding handset on chrome-plated rail with flexible shower hose removable with push fit rapid STOP connector.
    Hygiene control lever L. 100mm.
    Top inlets with M1/2″ inline stopcocks.
    Concealed fixings and filters.
    10-year warranty.

  • CANAL wall-mounted wash trough
    Ref. 120240

    Wall-mounted wash trough for 1 post.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
    Drainage on the right.
    With no tap hole.
    Supplied with 1 ½” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14296.
    Weight: 6kg.
    Possible to add a bacteriostatic 304 stainless steel splashback (ref. 0011800001).

  • CANAL wall-mounted wash trough
    Ref. 120260

    Wall-mounted wash trough for 2-3 posts – L. 1,400mm
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1mm for the bowl, 1.5mm for surroundand fixing brackets.
    Easy to install: no joint concealers to install, light wash trough.
    Drainage on the right.
    With no tap hole.
    Supplied with 1 ½” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14296.
    Weight: 10kg.

  • LP trough urinal
    Ref. 130320

    Floor-standing trough urinal.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rear water inlet.
    Central drainage.
    Supplied with 3 stainless steel rinsers and 3 flexible hoses.
    Water saving: optimal rinsing with 0.1 L/sec. per service i.e. 0.3L per use.
    Waste outlet 1½”. Supplied with waste and integrated trap (ref. 785000).
    Easy to install and maintain thanks to access panels with theft prevention TORX security screws.
    Weight: 33.5kg.
    Length: 1800mm

  • Surgical scrub-up trough with low upstand
    Ref. 187020

    Wall-mounted surgical scrub-up trough with 75mm upstand.
    Suitable for hospitals and healthcare facilities.
    Bacteriostatic 304 stainless steel. Polished satin finish. Stainless steel thickness: 1.2mm.
    Length 2,100mm, 3 services. Without tap hole.
    Smooth surface and rounded inside edges for easy cleaning.
    “Hygiene+”: reduces niches where bacteria can develop, concealed trap, easy to clean.
    Drainage on the right. Without overflow. Supplied with fixing elements.
    Weight: 37.6kg.

  • FINO WF water-free urinal
    Ref. 135010

    Wall-hung individual water-free urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Recessed horizontal waste outlet.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    1½” waste outlet.
    Supplied with a silicone membrane to prevent bad smells.
    Supplied with fixing elements.
    Weight: 3.5kg.

  • Luna

    From £80.00 ex VAT

    Mineral Collection

    From subtle shimmers to flickering quartz; this versatile collection complements both modern and traditional spaces.These stylish designs blend confidence with refinement to ensure that you have the right decor for your feature. All decors from the Mineral Collection are manufactured from a moisture resistant MDF core and finished with a high pressure laminate (HPL).

  • Non concussive pre-set basin taps
    Ref. RAKCOM908C

    • 45w x 108.3d x 147h mm
    • Colour: CHROME
    • Code: RAKCOM908C
    • Pressure: 1 BAR – 6.0 BAR
    • Warranty: 15 YEARS
    • Weight: 1.48 KG

  • Recessed waterproof housing for TEMPOMATIC 4 urinal

    Ref. 752430

    For standard urinal Ø 35mm

    Neck tube for TEMPOMATIC 4 and TEMPOFLUX recessed flush valves

    Ref. 752430

    Neck tube for TEMPOMATIC 4 and TEMPOFLUX recessed flush valves

    Ref. 752430

    Neck tube for TEMPOMATIC 4 recessed urinal valves, recessed TEMPOFLUX

    urinals and standard urinals with Ø 35mm connection washer for supply.

    30-year warranty.

  • Urinal Packs (concealed traps)

    From £333.00 ex VAT

    Product Description

    A complete urinal pack that includes everything you need. Choose how many urinals are required for your installation.

    • Ceramic Urinal with concealed trap
    • Concealed Urinal Cistern
    • Brackets
    • Plastic Dome Waste
    • Back Inlet Spreader (Concealed)
    • Q10 Bottle Trap

     

     

    Please note: Due to it’s fragile nature, this product will be delivered on a pallet at a cost of £60.

  • From our best selling range of washroom packs, this convenient Low Level Toilet Pack includes:

    • Junior Low-Level Toilet Pan
    • Exposed Ceramic WC Cistern – White
    • Junior Toilet Seat (White)
    • STAINLESS STEEL TOP FIX HINGE

    Technical Sheet

  • From our best selling range of washroom packs, this convenient Low Level Toilet Pack includes:

    • Infant Low Level Toilet Pan
    • Exposed Ceramic WC Cistern – White
    • Infant Open Ring Toilet Seat (White)
    • STAINLESS STEEL TOP FIX HINGES

    Specification

  • From our best selling range of washroom packs, this convenient Low Level Toilet Pack includes:

    • Junior Low-Level Toilet Pan
    • Exposed Plastic WC Cistern – White
    • Junior Toilet Seat (White)
    • STAINLESS STEEL TOP FIX HINGE

    (Ceramic cistern pictured for illustrative purposes)

    Technical Sheet

     

  • From our best selling range of washroom packs, this convenient Back to Wall Toilet Pack includes:

    • Junior BTW Toilet Pan
    • Concealed Toilet Cistern
    • Junior Toilet Seat (White)
    • STAINLESS STEEL TOP FIX HINGES

    Technical Sheet

  • From our best selling range of washroom packs, this convenient Low Level Toilet Pack includes:

    • Infant Low Level Toilet Pan
    • Exposed Plastic WC Cistern – White
    • Infant Open Ring Toilet Seat (White)
    • STAINLESS STEEL TOP FIX HINGES

    Technical Sheet

  • From our best selling range of washroom packs, this convenient Back to Wall Toilet Pack includes:

    • Infant BTW Toilet Pan
    • Concealed Toilet Cistern
    • Infant Open Ring Toilet Seat (White)
    • STAINLESS STEEL TOP FIX HINGES

    Technical Sheet

  • Product Description

    This Doc M pack is designed to provide a toilet facility with additional support for the user.
    The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.

     

    Features & Benefits

    • Complies with Part M of the Building Regulations
    • Reg 4 Certified (WRAS, NSF, Kiwa, etc.) and TMV3 approved thermostatic mixer shower with extended lever
    • Extended projection shower seat to allow easier side transfer from wheelchair
    • Non-corrosive concealed fixings stainless steel grab rails & hinged support rails
    • Simple one box solution
  • Product Description

    This Doc M pack is designed to provide a toilet facility with additional support for the user.
    The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.

     

    Features & Benefits

    • Complies with Part M of the Building Regulations
    • Reg 4 Certified (WRAS, NSF, Kiwa, etc.) and TMV3 approved thermostatic mixer shower with extended lever
    • Extended projection shower seat to allow easier side transfer from wheelchair
    • Non-corrosive concealed fixings stainless steel grab rails & hinged support rails
    • Simple one box solution
  • Product Description

    This Doc M pack is designed to provide a toilet facility with additional support for the user.
    The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.

  • Product Description

    This Doc M pack is designed to provide a toilet facility with additional support for the user. The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.

    TMV3 approved in-line under basin mixer valve
    LABC approved
    WRAS approved

     

    • Complies with Part M of the Building Regulations
    • Inlet valve and syphon Reg 4 Certified (WRAS, NSF, Kiwa, etc.)
    • Concealed fixing stainless steel grab rails and back rest
    • Optional TMV3 valve (DM315KS/** & DM315KS/LC/**)
    • Universal – suitable for left or right handed transfer
    • Simple one box solution
  • Pendle CGL Box B Cubicle Partition Pack Contents:

    • 2 no. 1800mm x 887mm partition sections
    • 1800mm x 300mm middle hinge fascia panel
    • Partition support leg and fixings
    • 1175mm long PVC fixing channel
    • Pack of 4 D brackets for wall fixing
    • Pack of 4 D brackets for pilaster fixing

    This toilet pack contains all the necessary panels and fittings to create a toilet cubicle dividing partition with a maximum depth of 1800mm.

    This partition pack is for use with with White CGL toilet cubicle door packs.

    • Easy to specify – every cubicle partition requires one Box B
    • Fast delivery –  usually delivered within 5-7 working days
    • Responsibly sourced Compact Grade Laminate panels
    • Suitable for Dry and Wet Environments
    • An extra Pendle  CGL leg is required for the inline with return configuration.

    For Free-standing cubicles, this product must be specified with the appropriate number of Box A door panels

     

  • Pendle CGL Cubicle Door Pack (Box A)

    Pendle white toilet cubicle door pack with white pilasters

    From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.

    The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1800 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Channels, Head Rail and fittings

    Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack

  • Basin pack with one tap hole, this Vanity Basin Pack also includes:

    • Basin Waste
    • Bottle Trap
    • No tap supplied to allow for fitting of own taps
    • Available as either Inset or Semi Recessed
  • Sale!

    Wall Panel System Marshmallow/White

    Original price was: £140.00.Current price is: £126.00. ex VAT

    Developed for either Urinal or WC panel configurations,  this wall panel system is compatible with both Pendle and Pendle Junior toilet cubicle packs and has an overall height to match toilet cubicles (1950mm).

    Marshmallow wall panels and white flash gaps.

    This box packed wall panel system can be cut-to-size on site to fit various cubicle widths up to a maximum of 1200mm.
    For a complete finish each panel pack is supplied with a 1200mm (W) X 300mm (D) lid.

    • Simple to specify – x1 complete panel system per box
    • Easy to install – adjustable on-site
    • Quick delivery – usually delivered within 5-7 working days

    Timber frame supplied by other. Not suitable for shower areas.

  • Sale!

    Junior toilet cubicle door pack – Woodgrain/Stone Grey

    Original price was: £185.00.Current price is: £166.50. ex VAT

    Pendle Junior Cubicle Door Pack (Box A)

    Pendle junior toilet cubicle door pack – Woodgrain with Stone Grey pilasters

    From the Pendle Junior range, this Woodgrain Blue door and pilaster pack is designed with the children’s comfort and safety in mind, the specially-shaped door allows for adult safety inspections even when the door is locked. You may customise the door further with the outward opening adaptor included in the pack.

    The Pendle Junior toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 1350mm high and  950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1350 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Channels, Head Rail and fittings

    Junior door panels need to be matched with the  junior partitions box B pack

Go to Top