• TEMPOMATIC 4 electronic tap
    Ref. 44000015

    Deck-mounted electronic basin tap:
    230/6V recessed mains supply.
    Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 sec. every 24h after last use).
    Active, infrared presence detection, sensor at the end of the spout optimises detection.
    Chrome-plated solid brass body.
    Cap fixed in place by two concealed screws.
    PEX flexible with stopcock, filter and Ø 15mm conical inlet.
    Fixing reinforced by 2 stainless steel rods.
    Anti-blocking safety.
    10-year warranty.

  • HEMI inset round washbasin Ø 385mm
    Ref. 120490

    Round washbasin for recessed installation from above or below.
    Basin internal diameter: 385mm.
    Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.6kg.

  • Wall-mounted paper towel dispenser, for 500 sheets
    Ref. 510601P

    Wall-mounted paper towel dispenser.
    Dispenses one sheet at a time, suitable for most paper towels.
    With lock and standard DELABIE key.
    Level control.
    Capacity: 500 sheets.
    Bright polished 304 bacteriostatic stainless steel.
    Dimensions: 120 x 275 x 360mm.
    Pack of 180 interfolded paper towels can be ordered separately (ref. 6606).
    Paper towel dimensions: open 230 x 250mm, folded 115 x 250mm.
    10-year warranty.

  • Wall-mounted 304 stainless steel bin, 38 litres
    Ref. 510463S

    Wall-mounted, rectangular bin for paper towels and paper towels.
    Robust model.
    1mm thick.
    Bacteriostatic 304 stainless steel.
    Capacity 38 litres.
    Polished satin 304 stainless steel.
    Stainless steel thickness: 1mm.
    Dimensions: 160 x 400 x 590mm.
    10-year warranty.

  • Wall-mounted toilet brush set with lid
    Ref. 4051EW

    Wall-mounted toilet brush set with lid.
    Bacteriostatic 304 stainless steel. White powder-coated finish.
    Wall-mounted model with anti-theft lock for fixing.
    Robust model.
    Easy to clean: plastic bowl can be removed from above.
    Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
    Toilet brush automatically centres itself in the holder.
    Stainless steel body 1mm thick.
    Dimensions: Ø 90 x 410mm.
    10-year warranty.

  • SECURITHERM BIOCLIP thermostatic sink mixer
    Ref. H9611P

    Wall-mounted SECURITHERM thermostatic sequential sink mixer with removable BIOCLIP spout.
    Comes with 2 stainless steel BIOCLIP spouts (ref. 20003) L. 135mm Ø 28mm for complete internal cleaning/descaling.
    Can be replaced with 10 BIOFIL filter spouts for immediate protection against waterborne infections, or 15 disposable Hostaform® spouts (recyclable) with star shaped flow straightener.
    Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
    Securitouch thermal insulation prevents burns.
    No non-return valves on the inlets.
    Scale-resistant thermostatic sequential cartridge for single control temperature and flow-rate adjustment.
    Adjustable temperature from cold water to 40°C with maximum temperature limiter set at 40°C.
    Chemical and thermal shocks can be carried out.
    Smooth body and spout interiors, with low water volume (reduces niches where bacteria can develop).
    Flow rate regulated at 7 lpm.
    No manual contact thanks to Hygiene control lever L. 146mm.
    Mixer with 150mm centres, supplied with in-line STOP/CHECK connectors ideal for the needs of hospitals.
    Chrome-plated brass body.
    10-year warranty.

  • Rectangular stainless steel mirror, H. 1000mm
    Ref. 3459

    Rectangular mirror made from “mirror” polished bacteriostatic 304 stainless steel.
    For combined installation: height enables use from standing or sitting positions, or from a wheelchair.
    Reinforced by a concealed, solid, 10mm thick PVC plate.
    5 fixing points. Concealed fixings.
    Unbreakable.
    Dimensions: 10 x 595 x 980mm.
    10-year warranty.

  • Wall-mounted electronic liquid soap dispenser, 1 litre
    Ref. 512066P

    Electronic liquid soap dispenser, wall-mounted.
    Vandal-resistant model with lock and standard DELABIE key.
    No manual contact: hands are automatically detected by infrared cell (detection distancecan be adjusted).
    Bacteriostatic 304 stainless steel cover.
    One-piece hinged cover for easy maintenanceand better hygiene.
    No waste pump dispenser: dispenses 0.8ml(can be adjusted up to 7 doses per activation).
    Option of operation in anti-clogging mode.
    Power supply: 6 AA -1.5V (DC9V) batteries supplied integrated in the soap dispenser body.
    Low battery indicator light.
    Tank with large opening: eases transfer of soapfrom large containers.
    Window allows soap level to be checked.
    Bright polished 304 stainless steel.
    Stainless steel thickness: 1mm.
    Capacity: 1 litre.
    Dimensions : 90 x 105 x 256mm.
    For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
    Compatible with hydroalcoholic gel.
    CE marked.
    10-year warranty.

  • SECURITHERM BIOCLIP thermostatic sink mixer
    Ref. H9614P

    Wall-mounted SECURITHERM thermostatic sequential sink mixer with removable BIOCLIP spout.
    Comes with 2 stainless steel BIOCLIP spouts for complete internal cleaning/descaling.
    Anti-scalding failsafe: hot water shuts off immediatly if cold water supply fails.
    Securitouch thermal insulation prevents burns.
    No non-return valves on the inlets.
    Scale-resistant thermostatic sequential cartridge for single control temperature and flow-rate adjustment.
    Adjustable temperature from cold water to 40°C with maximum temperature limiter set at 40°C.
    Chemical and thermal shocks can be carried out.
    Smooth body and spout interiors, with low water volume (reduces niches where bacteria can develop).
    Flow rate regulated at 7 lpm.
    No manual contact thanks to Hygiene control lever L. 146mm.
    Mixer with 200mm centres, supplied with in-line STOP/CHECK connectors ideal for the needs of hospitals.
    Chrome-plated brass body.
    10-year warranty.

  • Shower head
    Ref. 64000

    Wall-mounted shower head with grid.
    Compact, fixed and tamperproof shower head.
    5 ring spray plate.
    Grub screw fixing.
    40 lpm at 3 bar without flow limiter.
    10-year warranty.

  • MINIMAL corner washbasin
    Ref. 121550

    Wall-mounted corner washbasin (90° angle).
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm
    Rounded edges prevent injury.
    With Ø 35mm central tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4kg.

  • Slimline toilet seat lid
    Ref. 102419

    Toilet seat with lid.
    Slimline design.
    Made from Duroplast.
    Colour: black.
    With 304 stainless steel hinges.
    For BCN WC models.
    Supplied with fixing elements.

  • Adjustable height floor trap
    Ref. 682001UK

    Floor trap for hard floors (tiles or concrete floors) with adjustable height:
    Flow rate 36 lpm (standard).
    Water level 50mm.
    100 x 100mm bright polished stainless steel grid.
    Ø 43mm horizontal outlet integrated into the height of the floor trap (saves height and space in all directions).
    Integrated waterproof collar to seal waterproof membrane.
    Withstands high temperatures: 60°C continuous, 85°C peak.
    Plunger with handle: easy to grip and easy cleaning.
    Smooth PVC body (prevents build-up of impurities).
    Classified non-flammable (American certification UL94).
    110mm high, adjusts up to 80mm with extension.
    Grill fixed with two stainless steel screws.
    10-year warranty.

  • Shower curtain
    Ref. 381

    White PVC shower curtain.
    Supplied with 6 plastic curtain rings.
    Height: 1.80m.
    Width: 0.90m.

  • Shower curtain
    Ref. 1386

    White PVC shower curtain.
    Supplied with 12 plastic curtain rings.
    Height: 2.00m.
    Width:1.80m.

  • Shower curtain
    Ref. 387

    White PVC shower curtain.
    Supplied with 12 plastic curtain rings.
    Height: 1.80m.
    Width:1.80m.

  • TU urinal divider for wall-mounting
    Ref. 100610

    Urinal divider for wall-mounting.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.5mm
    Smooth surface and rounded edges.
    Supplied with theft prevention TORX security screws.
    Weight: 6.2kg.

  • Wall-mounted paper towel dispenser, for 750 sheets
    Ref. 6601

    Wall-mounted paper towel dispenser.
    With lock and standard DELABIE key.
    With level control.
    Capacity 750 sheets.
    Stainless steel thickness: 1mm.
    Bright polished stainless steel.
    Dimensions: 130 x 275 x 450mm.
    Pack of 180 folded paper towels can be ordered separately.
    Paper towel dimensions: open 230 x 250 mm, closed 115 x 250 mm.
    10-year warranty.

  • Wall-mounted shelf to conceal fixings in showers
    Ref. 511921W

    Matte white, wall-mounted shelf to conceal fixings without mounting bracket for Be-Line shower seats.
    Conceals the mounting bracket when the lift-up shower seat is removed.
    Reduces the number of lift-up shower seats in a facility, allowing installation only when required. E.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Dimensions: 55 x 275 x 90mm.
    10-year warranty.

  • Be-line lift-up shower seat with leg
    Ref. 511930C

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid seat made from high strength polymer.
    Non-slip surface.
    Reinforced by a central, hinged leg which folds automatically.
    Metallised anthracite finish provides a good visual contrast with the wall.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 443 x 450 x 480mm.
    Folded dimensions: 87 x 541mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

Go to Top