3000mm splashback for lavabo CANAL wash trough
Ref. 100310
Splashback for CANAL wash trough.
Bacteriostatic 304 stainless steel.
Polished satin stainless steel.
Stainless steel thickness: 1.2mm.
Length: 3000mm.
-
-
Wall-mounted wash trough for wall-mounting, for 2 services.
MINERALCAST: composite material consisting of natural mineralsand polyester resin.
Ideal for use in public and commercial places.
Uniform, non-porous surface is easy to clean.
One-piece cast washbasin, seam-free, for easy maintenanceand better hygiene.
Pleasant to the touch.
With no tap hole.
Supplied with 1 ½” waste. Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 64kg.
MINERALCAST pedestals in anthracite also available, sold individually -
Wall-mounted toilet brush set with lid
Ref. 4051EWWall-mounted toilet brush set with lid.
Bacteriostatic 304 stainless steel. White powder-coated finish.
Wall-mounted model with anti-theft lock for fixing.
Robust model.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel body 1mm thick.
Dimensions: Ø 90 x 410mm.
10-year warranty. -
Wall-mounted toilet brush set with lid
Ref. 4051SWall-mounted toilet brush set with lid.
Bacteriostatic polished satin 304 stainless steel.
Wall-mounted model with anti-theft lock for fixing.
Robust model.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel body 1mm thick.
Dimensions: Ø 90 x 410mm.
10-year warranty. -
Wall-mounted toilet brush set with lid
Ref. 4051PWall-mounted toilet brush set with lid.
Bacteriostatic bright polished 304 stainless steel.
Wall-mounted model with anti-theft lock for fixing.
Robust model.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel body 1mm thick.
Dimensions: Ø 90 x 410mm.
10-year warranty. -
Wall-mounted 304 stainless steel bin, 38 litres
Ref. 510463SWall-mounted, rectangular bin for paper towels and paper towels.
Robust model.
1mm thick.
Bacteriostatic 304 stainless steel.
Capacity 38 litres.
Polished satin 304 stainless steel.
Stainless steel thickness: 1mm.
Dimensions: 160 x 400 x 590mm.
10-year warranty. -
Wall-mounted 304 stainless steel bin, 38 litres
Ref. 510463PWall-mounted rectangular bin for paper towels and waste paper.
Robust model.
Bacteriostatic 304 stainless steel.
Capacity 38 litres.
Bright polished 304 stainless steel.
Stainless steel thickness: 1mm.
Dimensions: 160 x 400 x 590mm.
10-year warranty. -
Anti-bacterial BIOFIL spout filter
Ref. 20040.10PSingle use removable BIOFIL anti-bacterial spout, sterilising grade 0.1μm absolute-rated.
Can be installed instead of BIOCLIP spouts.
Hydrophilic polyethylene hollow fibres.
Filtration area: 1,200cm².
Filtration flow rate: 6 lpm at 3 bar (filter only, excludes any flow rate restrictor/regulator in the mixer).
Maximum upstream pressure at point-of-use: 5 bar.
Length of maximum use: 62 days after installation.
Compatible with and resistant to chemical and thermal shocks.
CE class 1 sterile anti-bacterial filters.
Weight: 40g.
Supplied in boxes of 10, individually wrapped, sterile. -
Wall mounted MINERALCAST PMR washbasin
Ref. 132306Wall-mounted washbasin, 785 x 545 x 150mm.
With integral side grips, can be used to support user or as a towel rail.
Sleek and fluid lines.
MINERALCAST: a composite material consisting of natural minerals and polyester resin.
Suitable for use in public and commercial places and the healthcare sector.
Shallow washbasin ideal for people with reduced mobility.
Uniform, non-porous surface is easy to clean.
One-piece pressed washbasin, seam-free, for easy maintenance and better hygiene.
Warm to the touch.
With Ø 35mm central tap hole.
Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 21.5 kg. -
Wall-mounted paper towel dispenser, for 500 sheets
Ref. 510601SWall-mounted paper towel dispenser.
Dispenses one sheet at a time, suitable for most paper towels.
With lock and standard DELABIE key.
Level control.
Capacity: 500 sheets.
Polished satin 304 bacteriostatic stainless steel.
Dimensions: 120 x 275 x 360mm.
Pack of 180 interfolded paper towels can be ordered separately (ref. 6606).
Paper towel dimensions: open 230 x 250mm, folded 115 x 250mm.
10-year warranty. -
Wall-mounted paper towel dispenser, for 500 sheets
Ref. 510601PWall-mounted paper towel dispenser.
Dispenses one sheet at a time, suitable for most paper towels.
With lock and standard DELABIE key.
Level control.
Capacity: 500 sheets.
Bright polished 304 bacteriostatic stainless steel.
Dimensions: 120 x 275 x 360mm.
Pack of 180 interfolded paper towels can be ordered separately (ref. 6606).
Paper towel dimensions: open 230 x 250mm, folded 115 x 250mm.
10-year warranty. -
Anti-bacterial BIOFIL shower head filter
Ref. 20060.10PSingle use removable BIOFIL anti-bacterial shower head filter, with sterilising grade of 0.1μm absolute-rated.
Hydrophilic polyethylene hollow fibres.
Filtration area: 1,400cm².
Filtration flow rate: 12 lpm at 3 bar (filter only, excludes any flow rate restrictor/regulator in the shower).
Maximum upstream pressure at point-of-use: 5 bar.
Length of maximum use: 62 days after installation.
Compatible with and resistant to chemical and thermal shocks.
CE class 1 sterile anti-bacterial filters.
Weight: 120g.
Supplied in boxes of 10, individually wrapped, sterile. -
Sequential thermostatic shower mixer
Ref. H963015SECURITHERM thermostatic sequential individual shower mixer.
Opens and closes with cold water.
No risk of cross flow between hot and cold water.
Mixer with no non-return valves on the inlets (reduces bacterial proliferation).
Anti-scalding failsafe: shuts off immediately if cold water supply fails (and vice versa).
Securitouch thermal insulation prevents burns.Scale-resistant thermostatic sequential cartridge adjusts the flow rate and the temperature.
Temperature can be adjusted from cold water to 39°C with maximum temperature limiter set at 39°C.
Thermal shocks are possible.
Body with smooth interior and low water volume (reduces niches where bacteria can develop).
Flow rate regulated at 9 lpm.
Chrome-plated brass body and Hygiene control lever L. 100mm.
M1/2″ bottom outlet.
Supplied with M1/2″ M3/4″ inline STOP/CHECK, ideal for hospitals.
10-year warranty. -
Wall-mounted liquid soap dispenser, 1 litre
Ref. 510580Wall-mounted liquid soap dispenser with soft-touch operation.
Vandal-resistant model with lock and standard DELABIE key.
One-piece hinged cover for easy maintenance and improved hygiene.
Push-button with soft-touch operation.
Anti-blocking: single dose per press, even if the button is pressed for prolonged periods.
Waste preventing, non-drip (waterproof) pump dispenser.
Tank with large opening: eases transfer of soap from large containers.
Tank prevents long-term stagnation of soap.
Window for monitoring soap level.
304 stainless steel, bright polished finish.
Stainless steel thickness: 1mm.
Capacity: 1 litre.
Dimensions: 90 x 105 x 252mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel.
10-year warranty. -
TEMPOMATIC 4 electronic tap
Ref. 443406Wall-mounted electronic basin tap:
Battery-operated with integrated 123 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the tap.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated metal body L. 130mm.
Cap fixed in place by 2 concealed screws.
Wall-mounted.
Anti-blocking security.
Suitable for people with reduced mobility.
10-year warranty. -
TEMPOSOFT 2 time flow tap
Ref. 740300Deck-mounted time flow basin tap:
Soft-touch operation.
Time flow ~7 sec.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2″.
Fixing reinforced by back-nut with 3 stainless teel screws.
Supplied with red and blue markers.
Suitable for people with reduced mobility.
10-year warranty. -
TEMPOMATIC 4 electronic tap
Ref. 443506Wall-mounted electronic basin tap:
Battery-operated with integrated 123 6V Lithium batteries.
Reduced-stagnation solenoid valve and electronic unit integrated into the body of the mixer.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated metal body L. 190mm
Cap fixed in place by 2 concealed screws.
Wall-mounted.
Anti-blocking safety.
Suitable for people with reduced mobility.
10-year warranty. -
TEMPOSOFT 2 time flow tap
Ref. 740500Deck-mounted time flow basin tap:
Soft-touch operation.
Time flow ~7 seconds.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2″.
Fixing with back-nut.
Supplied with red and blue markers.
10-year warranty. -
Wall-mounted liquid soap dispenser, 1 litre
Ref. 510581Wall-mounted liquid soap dispenser with soft-touch operation.
Vandal-resistant model with lock and standard DELABIE key.
One-piece hinged cover for easy maintenance and improved hygiene.
Push-button with soft-touch operation.
Anti-blocking: single dose per press, even if the button is pressed for prolonged periods.
Waste preventing, non-drip (waterproof) pump dispenser.
Tank with large opening: eases transfer of soap from large containers.
Tank prevents long-term stagnation of soap.
Window allows soap level to be checked.
White powder-coated.
Metal thickness: 1mm.
Capacity: 1 litre.
Dimensions: 90 x 105 x 252mm.
For vegetable-based liquid soap with a maximum viscosity of 3,000 mPa.s.
Compatible with hydroalcoholic gel. -
HEMI inset round washbasin Ø 310mm
Ref. 120470Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.8mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.5kg. -
ROUND shower head
Ref. 709000Fixed shower head:
Recessed installation.
Flow rate 6 lpm at 3 bar.
Automatic flow rate regulation.
Scale-resistant and ligature-resistant with adjustable nozzle.
Chrome-plated brass.
Fixed with concealed blocking screw.
Systematically drains after use (no water retention or impurity deposits).
Inlet M1/2″.
10-year warranty. -
HEMI inset round washbasin Ø 385mm
Ref. 120491Round washbasin for recessed installation from above or below.
Basin internal diameter: 385mm.
Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
Bacteriostatic 304 stainless steel.
Bright polished finish.
Stainless steel thickness: 0.8mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1 ¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.6kg. -
Divider for wall-hung trough urinal
Ref. 100900Divider for wall-hung trough urinals.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Install directly onto the urinal in the desired position.
Only suitable for the new design wall-hung trough urinals ref.s 130100, 130110 and 130120. -
HEMI inset round washbasin Ø 385mm
Ref. 120490Round washbasin for recessed installation from above or below.
Basin internal diameter: 385mm.
Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.8mm
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1 ¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.6kg. -
PREMIX NANO thermostatic mixing valve
Ref. 732116Hot water thermostatic mixing valve for mixed water distribution from 34 – 60°C:
For 1 – 2 taps or 1 shower.
Anti-scalding safety: immediate shut-off if cold or hot water fails.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 – 60°C.
Brass body.
Filters and non-return valves.
Minimum flow rate to operate: 3 lpm.
Thermal shocks are possible.
Chrome-plated brass body M1/2” inlets and Ø 15mm conical outlets.
10-year warranty. -
SECURITHERM EP BIOSAFE pressure-balancing basin mixer
Ref. 26216EPSECURITHERM basin mixer H. 95mm L. 110mm with pressure balancing.
No spout: BIOSAFE hygienic outlet integrated into the body.
Anti-scalding safety: HW flow rate is reduced if CW supply fails.
Securitouch thermal insulation prevents burns.
Ø 35mm ceramic cartridge with pressure balancing.
Pre-set maximum temperature limiter.
Thermal shocks are possible without removing the control lever or shutting off the cold water supply.
Body with smooth interior and very low water volume (reduces bacterial development).
Flow rate limited to 4 lpm at 3 bar.
Solid control lever.
Mixer without pop-up waste.
Reinforced fixing via two stainless steel rods.
Supplied with copper tails and Ø 15mm stopcocks.
10-year warranty. -
REDO wall-mounted washbasin
Ref. 120710
Ref. 121710Wall-mounted washbasin.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3kg. -
Wall-mounted PMR XS washbasin
Ref. 120400Wall-mounted washbasin suitable for people with reduced mobility:shallow basin for easy wheelchair access.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 1/4″ waste.
With no overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 3.9kg. -
Be-line lift-up shower seat
Ref. 511920WBe-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Matte white powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 83 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
10-year warranty. CE marked. -
Be-line lift-up shower seat
Ref. 511920CBe-line removable lift-up shower seat for people with reduced mobility.
Large model.
Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
Retained in upright position. Slowed down descent.
Suitable for intensive use in public places or the healthcare sector.
Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
Non-slip surface.
Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
Solid aluminium mounting bracket.
5 concealed fixing points.
Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
Dimensions: 455 x 450 x 90mm.
Folded dimensions: 85 x 470mm.
Tested to over 200kg. Maximum recommended user weight: 135kg.
10-year warranty. CE marked. -
TEMPOMATIC 4 electronic tap
Ref. 44000015Deck-mounted electronic basin tap:
230/6V recessed mains supply.
Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 sec. every 24h after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
Cap fixed in place by two concealed screws.
PEX flexible with stopcock, filter and Ø 15mm conical inlet.
Fixing reinforced by 2 stainless steel rods.
Anti-blocking safety.
10-year warranty. -
SHA XS squat WC pan
Ref. 113710Floor-recessed squat WC pan, 500 x 220 x 600mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness 1.2mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
Bowl shape suitable for male and female use.
Non-slip foot area.
Vertical waste outlet: Ø 100mm.
Flushing system with one 304 stainless steel spreader.
Weight: 5kg.
10-year warranty. -
SHA 700 squat WC pan
Ref. 113610Floor-recessed squat WC pan, 700 x 220 x 700mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness 1.2mm.
One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
Bowl shape suitable for male and female use.
Non-slip foot area.
Vertical waste outlet: Ø 100mm.
Flushing system with one 304 stainless steel spreader.
Weight: 6kg.10-year warranty. -
PREMIX NANO thermostatic mixing valve
Ref. 732115Hot water thermostatic mixing valve for mixed water distribution from 34 – 60°C:
For 1 – 2 taps or 1 shower.
Anti-scalding safety: immediate shut-off if cold or hot water fails.
Temperature pre-set at 38°C, can be adjusted by the installer from 34 – 60°C.
Brass body.
Filters and non-return valves.
Minimum flow rate to operate: 3 lpm.
Thermal shocks are possible.
Nickel-plated brass body M1/2” inlets and Ø 15mm conical outlets.
10-year warranty. -
SPORTING shower kit
Ref. 714000Time flow shower kit for exposed installation:
SPORTING time flow valve M1/2″ for top inlet supply with mixed water.
For wall-mounted, exposed installation.
Reinforced shower column Ø 16mm and collar.
Soft-touch operation.
Time flow ~30 seconds.
Flow rate 6 lpm at 3 bar.
Tamperproof, scale-resistant fixed showerhead with automatic flow rate regulation.
De-pressurising push-button.
Fixings with stainless steel screws supplied.
Chrome-plated solid brass body.
Integrated non-return valve and filter.
10-year warranty. -
Wall-hung DELTA urinal
Ref. 134710Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed or exposed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 7.5kg. -
DELTA wall-hung urinal
Ref. 134170Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 7.5kg. -
TEMPOMATIC shower kit
Ref. 452159Cross wall electronic shower kit:
TEMPOMATIC electronic valve for mixed water supply.
For walls ≤ 155mm.
Power supply by electronic unit with solenoid valve 1/2″.
230/12V transformer.
2 operation modes:
– Automatic activation via presence detection.
– Voluntary ON/OFF activation by passing the hand in front of sensor ~10 cm.
Duty flush (~60 seconds every 24 hours after the last use).
Adjustable time flow from 30 to 60 seconds.
Flow rate set at 6 lpm at 3 bar.
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
Chrome-plated solid brass.
Wall plate flush to the wall.
Threaded rods can be cut-to-size.
10-year warranty. -
FRAJU wall-mounted washbasin
Ref. 120430
Ref. 121430Wall-mounted washbasin, 540x480mm.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
Rounded edges prevent injury.
Without tap hole.
Supplied with 1¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.65kg. -
FINO wall-hung urinal
Ref. 135110Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Top (exposed) water inlet.
Recessed horizontal or exposed waste outlet. Concealed trap.
Quick and easy to install from the front thanks to a stainless steel mounting frame.
Supplied with a 1½” P trap. Supplied with fixing elements.
CE marked. Complies with European standard EN 13407 for 2L flush.
Weight: 3.5kg. -
FINO wall-mounted urinal
Ref. 135710Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Rear water inlet (recessed).
Recessed or exposed horizontal waste outlet. Concealed trap.
Quick and easy to install to from the front thanks to a stainless steel mounting frame.
Supplied with a 11/2″ P trap. Supplied with fixing elements.
CE marked. Complies with European standard EN 13407 for a 2 litre flush.
Weight: 3.5kg. -
TEMPOMIX shower kit
Ref. 796209Time flow shower kit for cross wall installation:
TEMPOMIX 3/4″ single control mixer.
For walls ≤ 220mm.
Temperature control and operation via the push-button.
Maximum temperature limiter (adjustable by the installer).
Ligature-resistant collar.
Soft-touch operation.
Time flow ~30 seconds.
Flow rate 6 lpm at 3 bar.
Chrome-plated ROUND shower head, tamperproof with scale-resistant nozzle and automatic flow rate regulation.
Integrated non-return valves and filters.
Chrome-plated metal push-button.
Threaded rods can be cut-to-size.
10-year warranty. -
TEMPOSTOP shower kit
Ref. 749159Cross wall time flow shower kit:
TEMPOSTOP M1/2″ time flow valve for mixed water supply.
For walls ≤ 150mm.
Time flow ~30 seconds.
Flow rate 6 lpm at 3 bar.
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
Chrome-plated solid brass.
Concealed fixings and anti-rotating nut.
Threaded rods can be cut to size.
10-year warranty. -
Floor-standing disposal sink
Ref. 180150Floor-standing disposal sink.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
One-piece pressed bowl, seam-free.
Smooth surface is easy to clean.
Adjustable feet height up to 40mm.
Supplied with 1½” waste. Without overflow.
Hinged stainless steel bucket grid.
Weight: 10.6kg. -
Semi-recessed QUADRA washbasin
Ref. 120650Semi-recessed washbasin, 380x380mm.
Suitable for use with wall-mounted or extended mixer/tap.
Basin internal diameter: 310mm.
Cutout diameter: 310mm.
Stainless steel thickness: 1.2mm.
Polished satin finish.
Stainless steel thickness: 1.2mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3kg. -
DESCRIPTION
Floor-standing ILHA drinking fountain
Ref. 180100Floor-standing drinking fountain.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 0.8mm.
Height: 915mm.
Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
Flat perforated waste, without screws:easy to clean and vandal-resistant.
Recessed vertical water outlet. Waste outlet 1¼”.
Supplied with fixing elements.
Weight: 9.6kg. -
AQUEDUTO wall-mounted washbasin
Ref. 120150Wall-mounted washbasin, 700x440mm.
Simple and timeless design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
.Stainless steel thickness: 1.5mm
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with brackets and fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 12kg. -
BAILA floor-standing washbasin
Ref. 120170Floor-standing washbasin, height 830mm. Basin internal diameter: 310mm.
Design-led styling.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 0.8mm.
Rounded edges prevent injury.
No tap hole.
Supplied with 1 ¼” waste. Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 12kg. -
TEMPOMIX time flow mixer
Ref. 79500015Deck-mounted single control time flow basin mixer:
Soft-touch operation.
Temperature control and operation via the push-button.
Time flow ~7 seconds.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Chrome-plated solid brass body.
Ergonomic chrome-plated metal push-button.
PEX flexibles Ø 15mm for compression fittings with stopcocks, filters and non-return valves.
Fixing reinforced by 2 stainless steel rods.
Adjustable maximum temperature limiter.
10-year warranty. -
Wall-mounted SD drinking fountain
Ref. 180800Wall-mounted drinking fountain.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
Flat perforated waste, without screws:easy to clean and vandal-resistant.
Recessed horizontal water outlet.
Waste outlet 1¼” trap.
Supplied with fixing elements.Weight: 2.4kg. -
HEMI inset round washbasin Ø 310mm
Ref. 120471Round basin for recessed installation from above or below.
Basin internal diameter: 310mm.
Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
Bacteriostatic 304 stainless steel.
Bright polished finish.
Stainless steel thickness: 0.8mm.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1 ¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 1.5kg. -
Countertop ALGUI washbasin
Ref. 120110Countertop washbasin, Ø 375mm.
Suitable for use with wall-mounted or extended mixer/tap.
Basin internal diameter: 310mm.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Polished satin finish.
One-piece, seam-free pressed bowl.
Rounded edges prevent injury.
Supplied with 1¼” waste.
Without overflow.
CE marked. Complies with European standard EN 14688.
Weight: 3.8kg. -
SECURITHERM thermostatic basin mixer
Ref. H9600610Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
Securitouch thermal insulation prevents burns.
No non-return valve on the inlets.
Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
Spout and body with smooth interiors and low water volume.
Flow rate regulated at 7 lpm.
No manual contact thanks to Hygiene control lever L. 146mm.
Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
Reinforced fixing via 2 stainless steel rods.
10-year warranty. -
Floor-standing janitorial unit
Ref. 180140Floor-standing janitorial unit.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.0mm.
Smooth surface for easy cleaning.
Adjustable feet height up to 25mm.
With tap hole Ø 35mm on right side.
Supplied with 1 ¼” waste for washbasin and 1½” for disposal sink. Without overflow.
Hinged stainless steel bucket grid.
Weight: 22kg. -
TEMPOMATIC electronic tap for sinks with BIOCLIP removable spout
Ref. 20804T215Wall-mounted electronic tap with BIOCLIP spout, for mounting on panels < 20mm.
Independent IP65 electronic control unit (integrated 230/12V transformer).
Flow rate limited to 5 lpm at 3 bar.
Comes with 2 removable stainless steel spouts L. 188mm Ø 28mm.
Base and spout with smooth interiors (reduces niches where bacteria can develop).
Adjustable duty flush (pre-set to approx. 60 secs every 24h after last use) in order to prevent water stagnation in the network in the event of prolonged periods of non-use.
Separate sensor for mounting on panels.
Solenoid valve Ø 15mm for compression fittings with integrated filter.
Shock-resistant infrared presence detection sensor.
Chrome-plated Ø 60mm brass base.
Anti-blocking security.
Recommended installation height: 110-200mm above the basin surface.
Two shut-off options:
– standard mode: timed flow with automatic shut-off.
– ON/OFF mode: user shuts off flow voluntarily after 30 minutes.
Thermal shocks are possible.
10-year warranty. -
BOB TC washbasin
Ref. 160130Wall-mounted washbasin with through-the-wallinstallation for service ducts.
Basin internal diameter: 310mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
Vandal-resistant: shrouded basin.
200mm threaded rod can be cut to size (other lengths are available on request).
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standardEN 14688.
Weight: 5.5kg. -
Wall-mounted wash trough.
1800mm wide (see spec drawing)
3 posts.
MINERALCAST: composite material consisting of natural mineralsand polyester resin.
Ideal for use in public and commercial places.
Uniform, non-porous surface is easy to clean.
One-piece cast washbasin, seam-free, for easy maintenanceand better hygiene.
Pleasant to the touch.
With no tap hole.
Supplied with 1½” waste. Without overflow.
Supplied with fixing elements.
White, RAL 9016.
Weight: 90kg.
MINERALCAST pedestals in anthracite also available, sold individually -
FACIL wall-mounted washbasin
Ref. 120800 /121800Wall-mounted washbasin, 360x390mm.
Basin internal diameter: 320mm.
Clean and simple design.
Bacteriostatic 304 stainless steel.
Polished satin finish.
Stainless steel thickness: 1.2mm.
Rounded edges prevent injury.
With no tap hole.
Supplied with 1 ¼” waste.
Without overflow.
Supplied with fixing elements.
CE marked. Complies with European standard EN 14688.
Weight: 4.1kg. -
Wall-mounted eye wash station
Ref. 9102Wall-mounted eye wash station with manual control includes:
304 stainless steel basin Ø 250mm, green powder-coated finish.
Two spray heads fitted with protective caps in shock-resistant green ABS; will eject automatically when activated.
1/4-turn, nickel-plated brass valve opens and closes quickly.
Water flow is activated by the hand control. The eye wash will continue to operate when the hand control is released. The water flow will stop when the hand control is pulled towards the user.
Flow rate 20 lpm at 3 bar.
Aerators with stainless steel double filters.
Water supply M1/2″.
Pipework made from galvanised steel, grey powder-coated finish.
Hand control made from galvanised steel, green powder-coated finish.
Wall-mounted on a brass plate (screws not included.)
Supplied with identification sign for first aid equipment: “Eye Wash”.
10-year warranty.
