Educational, Healthcare and Commercial Sanitaryware

Need Help? Call us : 01924 457600

  • Delabie Splashback 1400mm For CANAL Wash Trough

    Delabie Splashback 1400mm For CANAL Wash Trough

    £127.00 ex VAT

    Splashback 1400mm for CANAL wash trough
    Ref. 100260

    Splashback for CANAL wash trough.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Length: 1,400mm.

  • Delabie Divider For Wall-Hung Trough Urinal

    Delabie Divider For Wall-Hung Trough Urinal

    £134.00 ex VAT

    Divider for wall-hung trough urinal
    Ref. 100900

    Divider for wall-hung trough urinals.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Install directly onto the urinal in the desired position.
    Only suitable for the new design wall-hung trough urinals ref.s 130100, 130110 and 130120.

  •

    Delabie SECURITHERM Thermostatic Basin Mixer

    £343.00 ex VAT

    SECURITHERM thermostatic basin mixer
    Ref. H9600610

    Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
    Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
    Securitouch thermal insulation prevents burns.
    No non-return valve on the inlets.
    Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
    Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
    Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
    Spout and body with smooth interiors and low water volume.
    Flow rate regulated at 7 lpm.
    No manual contact thanks to Hygiene control lever L. 146mm.
    Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
    Reinforced fixing via 2 stainless steel rods.
    10-year warranty.

  •

    Delabie MONOBLOCO S21 WC Pan With Cistern 620

    £1,145.00 ex VAT

    MONOBLOCO S21 WC pan with cistern
    Ref. 110390

    Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 815 x 620mm.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left).
    Recessed horizontal or vertical waste outlet. Supplied with PVC pipe.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick to install: 2 access panels with theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 21kg.
    10-year warranty.

  •

    Delabie SECURITHERM Sequential Shower Panel

    £572.00 ex VAT

    SECURITHERM shower panel
    Ref. H963915

    SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
    SECURITHERM sequential thermostatic mixer (non time flow).
    Temperature control from cold water up to 39°C.
    Maximum temperature limiter set at 39°C, can be adjusted.
    Anti-scalding failsafe: automatic shut-off if cold or hot water supply fails.
    Thermal shocks are possible.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation at 6 lpm at 3 bar.
    Hygiene control lever L. 100mm.
    Top inlets with M1/2″ stopcocks.
    With copper tails.
    Concealed fixings and filters.
    10-year warranty.

  •

    Delabie SECURITHERM Shower Panel Concealed Inlet

    £657.00 ex VAT

    SECURITHERM shower panel
    Ref. H9635

    SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
    SECURITHERM sequential thermostatic mixer (non time flow).
    Adjustable temperature control from cold water up to 39°C.
    Maximum temperature limiter set at 39°C, can be adjusted.
    Anti-scalding safety: automatic shut-off if cold or hot water supply fails.
    Thermal shocks are possible.
    Flow rate 9 lpm at 3 bar.
    Sliding handset on a chrome-plated rail with flexible hose.
    Hygiene control lever L. 100mm.
    Concealed supply via M1/2″ flexibles.
    Concealed fixings and filters.
    10-year warranty.

  •

    Showerwall Join Trim

    From £26.00 ex VAT

  • Geo Cube

    From £298.00 ex VAT

    Customs Collection 

    The Customs Collection offers a truly bespoke design solution. Choose from our library of stunning designs. Note: Delivery on all decors is 3-4 weeks.

  • Skylo Auto & Handle Dual Flush Valve

    Skylo Auto & Handle Dual Flush Valve

    £45.00 ex VAT

    SKY040

    A contactless compact cable operated flush valve, that can cater for both 11/2″ and 2″ outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit auto uni-button allowing quick access to a cistern for maintenance purposes.

    • No Touch Button
    • Dual Flush
    • Universal Button Fits all 40mm, 50mm & 60mm Holes
    • Supplied with Universal Cradles
    • Adjustable Flushing Volumes
    • Internal Adjustable Overflow

    Instruction video

  • Sale!
    Pendle Junior Toilet Cubicle Pack A with plain grey door and plain grey pilasters

    Junior toilet cubicle door pack Plain Grey

    Original price was: £185.00.Current price is: £166.50. ex VAT

    Pendle Junior Cubicle Door Pack (Box A)

    Pendle junior toilet cubicle door pack – plain grey with plain grey pilasters

    From the Pendle range, this plain grey door and pilaster pack is designed with the children’s comfort and safety in mind, the specially-shaped door allows for adult safety inspections even when the door is locked. You may customise the door further with the outward opening adaptor included in the pack.

    The Pendle Junior toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 1350mm high and  950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1350 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Channels, Head Rail and fittings

    Junior door panels need to be matched with the  junior partitions box B pack

  • Sale!
    Pendle Junior Door Pack A with Blueberry doors and plain grey pilasters

    Junior toilet cubicle door pack Blueberry/Plain Grey

    Original price was: £185.00.Current price is: £166.50. ex VAT

    Pendle Junior Cubicle Door Pack (Box A)

    Pendle junior toilet cubicle door pack – blueberry with plain grey pilasters

    From the Pendle range, this bluebery door and pilaster pack is designed with the children’s comfort and safety in mind, the specially-shaped door allows for adult safety inspections even when the door is locked. You may customise the door further with the outward opening adaptor included in the pack.

    The Pendle Junior toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 1350mm high and  950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1350 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Channels, Head Rail and fittings

    Junior door panels need to be matched with the  junior partitions box B pack

  • Aluminium Header rail

    18mm Header Rail 3m

    £36.00 ex VAT

    18mm Header Rail 3m

  • floor to ceiling column

    Floor to ceiling column

    £78.00 ex VAT

    Floor to ceiling column with feet

    Please note No wall brackets supplied. Please add 13mm or 18mm wall brackets if required for panels to attached to post.

  •

    Bag of 4 T-Nuts

    £7.00 ex VAT

    Bag of 4 T-Nuts

  •

    Be-Line® toilet roll holder for drop-down rails Matte White

    £29.00 ex VAT

    Delabie logo

     

     

    Be-Line® toilet roll holder for drop-down rails

    Ref. 511965W

    Toilet roll holder for Be-Line® drop-down support rails.
    Toilet paper dispenser.
    Matte white finish.
    Can be installed without removing the drop-down rail.
    30-year warranty.
  •

    Be-Line® toilet roll holder for drop-down rails Metallised Anthracite

    £29.00 ex VAT

    Delabie logo

     

     

    Be-Line® toilet roll holder for drop-down rails

    Ref. 511965C

    Toilet roll holder for Be-Line® drop-down support rails.
    Toilet paper dispenser.
    Metallised anthracite finish.
    Can be installed without removing the drop-down rail.
    30-year warranty.
  •

    Be-Line® matte white sliding shower head holder

    £31.00 ex VAT

    Delabie logo

     

     

    Be-Line® matte white sliding shower head holder

    Ref. 511911W

    Be-Line® shower head holder for shower riser rail for people with reduced mobility.
    Matte white.
    Tilting support for shower head.
    Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
    Slides by pressing the grip or pulling on the flexible hose.
    For Be-Line® shower rails.
    30-year warranty.
  •

    Be-line® T-shaped shower grab bar with sliding vertical rail

    £190.00 ex VAT

    Delabie logo

     

     

    Be-line® T-shaped shower grab bar with sliding vertical rail

    Ref. 511944W

    Be-line® T-shaped grab bar Ø 35mm for showers with sliding vertical rail.
    Use as a shower rail and to support the user in an upright position.
    Helps and secures entry and movement in the shower for people with reduced mobility.
    Use as a shower rail by adding a shower head holder and/or soap dish.
    Upright position can be adjusted during installation: can be moved to the left or the right in order to adapt the space (positioning of shower, depth of shower seat…).
    Aluminium tube thickness 3mm. Solid aluminium fixing points.
    Rounded profile Ø 35mm with ergonomic flat front face that prevents rotation for an optimal grip.
    Matte white powder-coated aluminium provides a good visual contrast with dark walls.
    Uniform surface for easy maintenance and hygiene.
    38mm gap between the bar and the wall: minimal space prevents the forearm passing between the bar and the wall, reducing the risk of fracture in case of loss of balance.
    Concealed fixings.
    Supplied with Ø 8 x 70 mm stainless steel screws for concrete walls.
    Dimensions: 1,130 x 500mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    30-year warranty. CE marked.
  •

    Be-Line drop-down support rail with leg, L.650 mm, matte black

    £368.00 ex VAT

    Delabie logo

    Be-Line drop-down support rail with leg, L. 650mm, matte black

    Ref. 511962BK

    Be-Line® drop-down support rail for people with reduced mobility.
    In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCs or showers.
    Allows side access in the raised position.
    Removable: easy to remove with anti-theft locking system. Reduces the number of bars in a facility, allowing installation only when required.
    Example: hotels or hospitals providing short-term accommodation for disabled people.
    Drop-down rail retained in upright position. Slowed down descent.
    Aluminium tube.
    Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
    Matte black powder-coated aluminium finish provides a good visual contrast with light-coloured walls.
    Uniform surface for easy maintenance and hygiene.
    Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Leg provides additional reinforcement when wall fixings are not enough.
    Dimensions: 650 x 825 x 120mm.
    Leg height can be adjusted from 760 – 780mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    Drop-down rail with 30-year warranty.
    CE marked.
  •

    Be-Line drop-down support rail, L.850 mm, matte black

    £332.00 ex VAT

    Delabie logo

     

    Be-Line drop-down support rail, L. 850 mm, matte black

    Ref. 511964BK

    Be-Line® drop-down support rail for people with reduced mobility.
    In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCs or showers.
    Allows side access in the raised position.
    Removable: easy to remove with anti-theft locking system. Reduces the number of bars in a facility, allowing installation only when required.
    Example: hotels or hospitals providing short-term accommodation for disabled people.
    Drop-down rail retained in upright position. Slowed down descent.
    Aluminium tube.
    Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
    Matte black powder-coated aluminium finish provides a good visual contrast with light-coloured walls.
    Uniform surface for easy maintenance and hygiene.
    Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 850 x 825 x 120mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    Drop-down rail with 30-year warranty.
    CE marked.

FREQUENTLY ASKED QUESTIONS

We don’t offer a fit out service ourselves, but our sister company Cubicle Centre has a nationwide network of fully approved installers. Contact them here to find out more:

A standard toilet cubicle is 750mm (wide) x 1500mm (deep).
Further diagrams and information on different types of toilet cubicles can be found on our Toilet Cubicle Size Page.

The Pendle and Pendle Junior box packed cubicle systems are usually dispatched within 3-5 working days of order. The complete Pendle range can be ordered online at Plumbware.co.uk

Our Pendle Range of toilet cubicles are  made by our sister company Cubicle Centre  and are designed as an off the shelf solution for quick delivery. They offer a more bespoke range of solutions on  amade to measure, job-to-job basis.
Email (sales@washroomcubicles.co.uk) your washroom requirements along with a drawing or sketch and they’ll do the rest.
Alternatively, visit www.washroomcubicles.co.uk/quote to fill in an online form.
The Sales team are on hand to answer any questions you may have on 01924 457600.

Lead times can vary from 5 to 7 working days depending on your specific requirements.
PLEASE NOTE: Lead times may increase during busier periods of the year (i.e. school holidays)

We don’t offer Account facilities here at Plumbware.co.uk, but should you have an ongoing requirement for regular orders of bulk items, you may apply to open an account with our sister company, Cubicle Centre. Account application forms are available here.

Different sectors have different washroom regulations.
For example, a school has different toilet layout regulations to an office. To save time and effort when planning your project we created PDF guides for different sectors. Schools, offices, leisure centres, stadiums and holiday parks are all covered.

Visit our Guide Page at washroomcubicles.co.uk

There are a number  of resources to help with the planning of a washroom project. 2D CAD drawings, 3D BIM files, specification sheets and a customised specification tool are available on our Architect Resources page.

YOUR ONE STOP SHOP FOR COMMERCIAL WASHROOM SOLUTIONS

COMPANY INFORMATION

01924 457600

Mon-Thursday 8.30am – 5pm
Friday: 8.30am – 3pm

OUR POLICIES

SECURE PAYMENTS BY

Registered in England: 06851971 | VAT no. 380618882 | © Plumbware.co.uk Ltd 2009 - 2025

Go to Top