• Floor to ceiling column with feet

    Please note No wall brackets supplied. Please add 13mm or 18mm wall brackets if required for panels to attached to post.

  • Delabie logo

     

    Be-Line drop-down support rail, L.650 mm, metallised anthracite

    Ref. 511960C

    Be-Line drop-down support rail for people with reduced mobility.
    In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCs or showers.
    Allows side access in the raised position.
    Removable: easy to remove with anti-theft locking system. Reduces the number of grab bars in a facility, allowing installation only when required.
    Example: hotels or hospitals providing short-term accommodation for disabled people.
    Drop-down rail with slowed down descent. Retained in upright position.
    Aluminium tube.
    Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
    Metallised anthracite powder-coated aluminium finish provides a good visual contrast with light-coloured walls.
    Uniform surface for easy maintenance and hygiene.
    Concealed fixings, secured to wall by a 304 stainless steel plate, 5mm thick.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 650 x 210 x 120mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    Drop-down rail with 30-year warranty.
    CE marked.
  • Delabie logo

     

    Be-Line drop-down support rail, L. 850 mm, matte black

    Ref. 511964BK

    Be-Line® drop-down support rail for people with reduced mobility.
    In the lowered position use as a grab bar, as a support for standing and for assisting movement, for WCs or showers.
    Allows side access in the raised position.
    Removable: easy to remove with anti-theft locking system. Reduces the number of bars in a facility, allowing installation only when required.
    Example: hotels or hospitals providing short-term accommodation for disabled people.
    Drop-down rail retained in upright position. Slowed down descent.
    Aluminium tube.
    Rounded profile Ø 42mm with ergonomic flat front face that prevents rotation for an optimal grip.
    Matte black powder-coated aluminium finish provides a good visual contrast with light-coloured walls.
    Uniform surface for easy maintenance and hygiene.
    Concealed fixings secured to wall by a 304 stainless steel plate, 5mm thick.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 850 x 825 x 120mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    Drop-down rail with 30-year warranty.
    CE marked.
  • Delabie logo
    Be-Line® WC pack with backrest
    Product Code: 511809

    DOC M Be-Line® WC pack suitable for commercial washrooms with 1 backrest, 1 drop-down support rail and 4 grab bars.
    Aluminium tube.
    Full pack contents below
    Available in Metallised Anthracite or Matt White

    Tested to over 200kg.
    Maximum recommended user weight 135kg.
    30-year warranty.
    CE marked.
    DOC M compliant.

  • Pendle Urinal Privacy Screen

    Compact Grade Laminate (CGL)

    The Pendle Compact Grade Lamniate (CGL) Urinal Privacy Screen comes with wall fixing brackets and a support foot.

    • Available in Plain Grey or Stone Grey
    • 450mm wide
    • 13mm CGL
    • Black core and radius edge
    • Wall fixing brackets
    • Adjustable support leg
    • 1250mm overall height with 150mm leg
    • Matches the Pendle range of toilet cubicles
    • Suitable for wet or dry areas
    • Usually despatched within 5-7 working days
  • 1 1/4” basin slotted waste in Chrome
    Ref. DW300

    • Construction: Brass
    • Inlet connections: 1 1/4″
    • Complete with plug and chain
    • Slotted waste for basins with a built in overflow
    • 1-year warranty.
  • SIAMP BCM350/1100 Back Plate Flush Plate attachment

    SIAMP Product code: 34115846

  • SIAMP BCM350 Flush Valve

    SIAMP Product code: 32454707

  • Concealed cistern for back to wall WC. WRAS and NF approved components. Cable flushing, bright chrome dual flush top flushing. 6 litres cistern equipped with a dual flush outlet valve and a quiet fill inlet valve. Water inlet connection on the bottom of the cistern with 1/2″ plastic tail. Dimensions height 436 mm, width 260 mm and depth 160 mm.
    Delivered with fixing and connection accessories.

  • Side entry inlet valve with 1/2″ & 3/8″ brass connection 1/2″ plastic, WRAS and NF certified and 10-year-guarantee.
    Features : quiet, hydraulic closure, adjustable water level and anti-back flow. Maintenance without the need for full disassembly. Length 270mm, width 112mm, depth 50mm.

  • Dual flush valve NF and WRAS certified, compact and water saving. The stirrup fixes the cistern lid once the button is screwed down and enables a non alignment position. Adjustable button with optional collar.
    Adjustable height from 282 and 432 mm, lid hole from 16 to 50, discharge hole from 58 to 72 mm. Adjustable : small flush, over flow (with no cut), dead water level.

  • Dual flush valve NF and WRAS certified, compact, water saving and cable operated. It allows an actuation at distance, lateral or head-on. Adjustable button with optional collar.
    Adjustable height from 272 and 482 mm, lid hole from 16 to 50, discharge hole from 58 to 72 mm. Adjustable : small flush, over flow, dead water level.

  • Dual ABS flush plate compatible with Ingenio wall frame kits

    Available in 5 colour options

  • Wall-mounted hair dryer with shaver socket
    Ref. 6624

    Wall-mounted hair dryer.
    Operated by sensor switch.
    Safety switch on the cradle.
    2 drying temperatures.
    Shaver socket.
    White ABS cover.
    Dimensions: 110 x 180 x 170mm.
    Weight: 1.3kg.
    Power: 1,200W. Air flow: 14 l/sec.
    Class II. CE, TÜV GS.
    Warranty: 3 years.

  • Wall-mounted soap dish
    Ref. 510627P

    Wall-mounted soap dish.
    Robust model.
    For showers or washbasins.
    304 stainless steel with bright polished finish.
    Stainless steel thickness: 1.5mm.
    Concealed fixings.

  • Double Clothes Hook
    Ref. 510042N

    White double clothes hook in high resistance polyamide (Nylon).
    Concealed fixings.
    Dimensions: Ø 62 x 42mm.

  • Stainless steel toilet signs
    Ref. 510151S

    Stainless steel self-adhesive toilet sign.
    Polished satin 304 stainless steel.
    Stainless steel thickness 1.2mm.
    “Female” sign.
    Dimensions: 125 x 125mm.
    10-year warranty.

  • Stainless steel toilet sign
    Ref. 510155S

    Stainless steel self-adhesive toilet sign.
    Polished satin 304 stainless steel.
    Stainless steel thickness 1.2mm.
    “Mixed disabled” sign.
    Dimensions: 125 x 125mm.
    10-year warranty.

  • U-shaped toilet roll holder with spindle
    Ref. 4081EW

    U-shaped toilet roll holder with spindle.
    Tube Ø 20mm, 1mm thick.
    White powder-coated 304 stainless steel.
    Concealed fixings.
    10-year warranty.

  • U-shaped toilet roll holder with spindle
    Ref. 4081S

    U-shaped toilet roll holder with spindle.
    Tube Ø 20mm, 1mm thick.
    Polished satin 304 stainless steel.
    Concealed fixings.
    10-year warranty.

  • Wall-mounted soap dish
    Ref. 710501

    Wall-mounted soap dish with concealed fixings.
    Robust model for public places.
    Chrome-plated Bayblend® bright finish.
    Dimensions: 60 x 160 x 40mm

  • Floor trap
    Ref. 683002UK

    Adjustable height floor trap for soft or vinyl floors:
    Flow rate 36 lpm (standard).
    Water level 50mm.
    Bright polished stainless steel grid Ø 114mm.
    Ø 43mm horizontal outlet integrated into the height of the floor trap (saves height and space in all dimensions).
    Integrated waterproof plate to seal waterproof membrane.
    Withstands high temperatures: 60°C continuous, 85°C peak.
    Plunger with handle: easy to grip and easy to clean.
    Smooth PVC body (prevents build-up of impurities).
    Classified non-flammable (American certification UL94).
    Height adjusts up to 85mm with extension.
    Grid fixed by two stainless steel screws.
    10-year warranty.

  • Straight curtain rail
    Ref. 4359

    Cut-to-size.
    Concealed fixings.
    Bright polished stainless steel tube, 1mm thick
    Dimensions: Ø 20mm, 2m can be cut to size.

  • Splashback 1400mm for CANAL wash trough
    Ref. 100260

    Splashback for CANAL wash trough.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Length: 1,400mm.

  • MONOBLOCO S21 WC pan with cistern
    Ref. 110390

    Floor-standing WC pan with dual flush cistern 3L/6L, 370 x 815 x 620mm.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.5mm.
    One-piece pressed WC bowl, seam-free for better hygiene.
    WC bowl surface is polished with rounded edges for easy cleaning.
    Concealed perimetral flushing rim. Water supply can be recessed from below or exposed from the side (right/left).
    Recessed horizontal or vertical waste outlet. Supplied with PVC pipe.
    Pre-drilled holes for fixing the toilet seat. Supplied with stainless steel blanking caps when installed without toilet seat lid.
    Quick to install: 2 access panels with theft prevention TORX security screws.
    CE marked. Complies with European standard EN 997 for 4L flush.
    Weight: 21kg.
    10-year warranty.

  • SECURITHERM shower panel
    Ref. H963915

    SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
    SECURITHERM sequential thermostatic mixer (non time flow).
    Temperature control from cold water up to 39°C.
    Maximum temperature limiter set at 39°C, can be adjusted.
    Anti-scalding failsafe: automatic shut-off if cold or hot water supply fails.
    Thermal shocks are possible.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation at 6 lpm at 3 bar.
    Hygiene control lever L. 100mm.
    Top inlets with M1/2″ stopcocks.
    With copper tails.
    Concealed fixings and filters.
    10-year warranty.

  • KOMPACT washbasin and floor-standing WC combination
    Ref. 160800

    Combination unit: washbasin and floor-standing central WC panwith recessed toilet roll holder.
    Wall-mounted installation with 3 access panels, 2 on the sidesand 1 on the top with theft prevention TORX security screws.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel unit thickness: 2mm.
    Rounded corners and edges for improved safety.
    Smooth surface for easy cleaning.
    Suitable for prisons, police stations, etc.
    WC pan is completely welded to washbasin, no screws:
    makes cleaning easier and prevents concealment of objects.
    WC pan central to the unit.
    Washbasin equipped with time flow tap: stainless steel tamperproofpush-button and anti-blocking system, 7 second time flow, M1/2″.
    WC equipped with time flow flush valve, 7 second time flow, M3/4″.
    Water inlet: washbasin M1/2″, WC M3/4″.
    Recessed horizontal water outlet: Ø 100mm.
    Supplied with washbasin siphon.
    Easy to install: only one water outlet for both washbasin and WC,water inlet and outlet already connected.
    Weight: 36kg.

  • SECURITHERM shower panel
    Ref. H9635

    SECURITHERM anodised aluminium shower panel for wall-mounted exposed installation:
    SECURITHERM sequential thermostatic mixer (non time flow).
    Adjustable temperature control from cold water up to 39°C.
    Maximum temperature limiter set at 39°C, can be adjusted.
    Anti-scalding safety: automatic shut-off if cold or hot water supply fails.
    Thermal shocks are possible.
    Flow rate 9 lpm at 3 bar.
    Sliding handset on a chrome-plated rail with flexible hose.
    Hygiene control lever L. 100mm.
    Concealed supply via M1/2″ flexibles.
    Concealed fixings and filters.
    10-year warranty.

  • Showerwall Join Trim

    From £26.00 ex VAT
  • Geo Cube

    From £298.00 ex VAT

    Customs Collection 

    The Customs Collection offers a truly bespoke design solution. Choose from our library of stunning designs. Note: Delivery on all decors is 3-4 weeks.

  • Recessed waterproof housing for TEMPOFLUX urinal
    Ref. 778BOX

    Recessed waterproof housing for urinals ½”, kit 1/2:

    Collar with waterproof seal.

    Hydraulic connection to the outside and maintenance from the front.

    Adjusts to all types of installation (rails, solid walls, panels).

    Compatible with wall finishes from 10 – 120mm (while maintaining the

    minimum recessing depth of 83mm).

    Suitable for standard or “pipe-in-pipe” supply.

    Stopcock and flow rate adjustment, filter and cartridge all integrated and

    accessible from the front.

    TEMPOFLUX F½” flush valve is compatible with rain water.

    Protected waterproof housing, valve with secure system flush without

    sensitive elements and connection accessories.

    Complies with European standard EN 12541 (class II acoustic level).

    Connection with Ø 35mm connection washer (for standard urinals) or ½” brass

    connection (for urinals supplied by flexible).

    For use with neck tube ref. 752430 or 757430.

    30-year warranty.

    Order with control plate references 778700 or 778707.

  • Product Description

    This Doc M pack is designed to provide a toilet facility with additional support for the user. The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.

    The pack contents include:

    5 x 600mm Steel Grab Rails
    1 x 800mm Lift & lock steel hinged Rail
    1 x Close coupled WC pan & cistern assembly
    1 x Ring only toilet seat with stainless hinge
    1 x Two tap hole basin & fittings
    1 x Basin mixer tap
    1 x Spatula cistern lever
    1 x TMV3 in-line thermostatic valve

    Finish options available in White, Grey and Dark Blue

     

    Features & Benefits

    • Inlet valve and syphon Reg 4 Certified (WRAS, NSF, Kiwa, etc.)
    • Universal – suitable for left or right handed transfer
    • Simple one box solution
    • Hygienic rimless pan with robust dedicated seat
  • SKY040

    A contactless compact cable operated flush valve, that can cater for both 11/2″ and 2″ outlet sizes. It has fully adjustable dual flush volumes, an adjustable internal overflow and an easy to fit auto uni-button allowing quick access to a cistern for maintenance purposes.

    • No Touch Button
    • Dual Flush
    • Universal Button Fits all 40mm, 50mm & 60mm Holes
    • Supplied with Universal Cradles
    • Adjustable Flushing Volumes
    • Internal Adjustable Overflow

    Instruction video

  • Pendle CGL Cubicle Door Pack (Box A)

    Pendle white toilet cubicle door pack with white pilasters

    From the Pendle range, this light grey toilet cubicle door is framed by stone grey pilasters which provides a modern finish to the traditional cubicle row and will give a professional look to your cubicles whether installed in a row or singly. Made from a durable Compact Grade Laminate, this door system is suitable for both dry and wet environments.

    The Pendle Commercial toilet cubicle pack system is a two box system, Box A consisting of everything needed to make a cubicle between two existing walls, and Box B, additional freestanding side partitions. The cubicle door supplied in Box A measures 950mm (wide) and is to be cut-to-size on site. This cut is then concealed by the full-height door hinge channel.

    The Pendle Box A Pack also includes an Outward Opening Adaptor to complete a cubicle door fitted for outward opening use.

    Pendle cubicle fittings are DDA (Disability Discrimination Act) Compliant. The cubicle latch is suitable for users with impaired manual dexterity (i.e. can be operated with a ‘closed fist’)

    This pack contains all the necessary panels and fittings to create an enclosed toilet cubicle with a max. width of 1200mm.

     

    Box A includes:

    • Door (1800 x 950mm)
    • End Pilasters (1800 x 150mm)
    • Lock & Latch with Outward Opening Adaptor
    • Channels, Head Rail and fittings

    Plain Grey door panels can be matched with either the CGL plain grey side partitions box B pack or the CGL Stone Grey partitions box B pack

  • 18mm Header Rail 3m

    £36.00 ex VAT

    18mm Header Rail 3m

  • Bag of 4 T-Nuts

    £7.00 ex VAT

    Bag of 4 T-Nuts

  • Replacement Pennine Indicator Bolt

  • Delabie logo

     

     

    Be-Line® toilet roll holder for drop-down rails

    Ref. 511965W

    Toilet roll holder for Be-Line® drop-down support rails.
    Toilet paper dispenser.
    Matte white finish.
    Can be installed without removing the drop-down rail.
    30-year warranty.
  • Delabie logo

     

     

    Be-Line® toilet roll holder for drop-down rails

    Ref. 511965C

    Toilet roll holder for Be-Line® drop-down support rails.
    Toilet paper dispenser.
    Metallised anthracite finish.
    Can be installed without removing the drop-down rail.
    30-year warranty.
  • Delabie logo

     

     

    Be-Line® matte white sliding shower head holder

    Ref. 511911W

    Be-Line® shower head holder for shower riser rail for people with reduced mobility.
    Matte white.
    Tilting support for shower head.
    Easy-to-operate ergonomic grip to adjust the height of the shower head holder.
    Slides by pressing the grip or pulling on the flexible hose.
    For Be-Line® shower rails.
    30-year warranty.
Go to Top