SIAMP BCM Flush Plate Fixing Screws (4)
SIAMP Product code: 34112246
-
Samoa Standard Wall hung WC pack
Complete pack comprising BCM 350 wall frame, 6 litre insulated cistern with NF approved components. Factory preset at 6/4 litres with integral dual flush outlet valve and a water saving and quiet fill delayed action inlet valve. Water inlet connection on the inside of the cistern fitted with an integral isolating valve. Front flush plate operation.
Supplied with fixing accessories for floor or wall fixing, dual flush plate, accessories for protection during the construction phase, ceramic wall hung WC, white thermoplastic toilet seat with stainless steel hinges, 90° outlet pipe and WC connectors.Closed ring toilet seat
-
Supplied with your semi-recessed type wash basins, this 2 tap-hole Vanity Basin Pack also includes:
- Soft Touch Brassware
- Basin Waste
- Bottle Trap
-
Toilet brush set with lid
Ref. 4050SToilet brush set with lid.
Polished satin bacteriostatic 304 stainless steel.
Floor-standing model.
Robust model.
Easy to clean: plastic bowl can be removed from above.
Plastic bowl with reservoir: avoids toilet brush sitting in residual water and reduces the risk of splashing when next used.
Toilet brush automatically centres itself in the holder.
Stainless steel thickness: 1mm.
Dimensions: Ø 90 x 410mm.
10-year warranty. -
PREMIX COMPACT
Ref. 733015PREMIX COMPACT thermostatic mixing valve for mixed water distribution from 30 – 60°C:
For 2 to 7 sanitary points-of-use (depending on the flow rate).
Anti-scalding safety: immediate shut-off if cold or hot water supply fails.
Adjustable temperature from 30 – 60°C, can be blocked by the installer.
Brass body.
Filters and non-return valves.
Minimum flow rate to operate: 5 lpm.
Thermal shocks are possible.
M1/2″.
Nickel-plated brass with blue control cap.
10-year warranty. -
Push-fit connectors for all types of mixers and taps. BIOFIL cartridge filters should be installed using these quick and easy push-fit connectors.
Delabie Connector Features
- Simple to connect without the need for tools
- No need to shut-off the water supply
Connectors for Cartridge A (without O ring seal) Delabie Product Code: F22 / 100 (820022) Delabie Product Code: M24 / 100 (820024) Delabie Product Code: M1/2″ (820023) Delabie Product Code: M24 / 125 (820025) Connectors for Cartridge P (with O ring seal) Delabie Product Code: F22 / 100 (820122) Delabie Product Code: M24 / 100 (820124)
-
Side entry inlet valve with 1/2″ & 3/8″ brass connection 1/2″ plastic, WRAS and NF certified and 10-year-guarantee.
Features : quiet, hydraulic closure, adjustable water level and anti-back flow. Maintenance without the need for full disassembly. Length 270mm, width 112mm, depth 50mm.
-
SIAMP BCM 790 attachment plate with hooks
SIAMP Product code: 34790407
-
Bottom entry inlet valve with connection 1/2″ plastic, WRAS certified and 10-year-guarantee.
Features: quiet, hydraulic closure, adjustable water level and anti-back flow. Length 270mm, width 112mm, deepth 50mm. -
HIGHFLOW high-speed hand dryer
Ref. 510622HIGHFLOW air pulse hand dryer.
Robust model.
Lit central nozzle focuses the pulsed air onto hands at over 230km/h.
High speed: dries in 10 – 12 seconds.
Choice of warm or cold air via a concealed switch.
Infrared automatic activation.
Intelligent technology: stops automatically when hands are removed.
Anti-blocking: stops automatically if used continuously for more than 60 seconds.
Bacteriostatic 304 bright polished stainless steel.
Easy to clean: one-piece cover.
Stainless steel thickness: 1mm.
Dimensions: 175 x 238 x 267mm.
Weight: 4kg.
Airflow: 39 l/second.
Air speed: 230 km/h.
Low energy consumption: 1350W.
220-240 V~/50Hz.
Noise level: 70 dBA.
Class I, IP22.
CE marked.
3-year warranty. -
U-shaped toilet roll holder with spindle
Ref. 4081NU-shaped toilet roll holder with spindle in white, high strength polyamide (Nylon).
Ø 20mm tube.
Concealed fixings.
10-year warranty. -
Toilet roll holder with spindle
Ref. 510567Toilet roll holder with spindle.
One-piece hinged cover for easy maintenance and better hygiene.
Anti-theft, integral polycarbonate spindle: unbreakable.
Polished satin bacteriostatic 304 stainless steel.
Concealed fixings.
Dimensions: 119 x 140 x 80mm.
10-year warranty. -
Straight curtain rail
Ref. 2359Cut-to-size.
Concealed fixings.
Bright polished stainless steel tube, 1mm thick
Dimensions: Ø 20mm, 1m can be cut to size. -
ROUND shower head
Ref. 709000Fixed shower head:
Recessed installation.
Flow rate 6 lpm at 3 bar.
Automatic flow rate regulation.
Scale-resistant and ligature-resistant with adjustable nozzle.
Chrome-plated brass.
Fixed with concealed blocking screw.
Systematically drains after use (no water retention or impurity deposits).
Inlet M1/2″.
10-year warranty. -
Shower panel
Ref. 79130015Mechanical shower panel with single control mixer and fixed shower head:
Anodised aluminium shower panel for wall-mounted, exposed installation.
Top inlet via in-line stopcocks and conical Ø 15mm inlets.
Non-time flow mechanical mixer.
Flow rate 6 lpm at 3 bar.
Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
Concealed fixings.
Filters.
10-year warranty. -
Intraslim B Wall Plate Attachment
SIAMP Product code: 34805107
-
Contains: Optima 49 dual flush valve with 470mm cable, Optima 50 push button, 1 1/2″ bayonet, 2″ bayonet, 99B bottom entry inlet valve with 1/2″ plastic connection, cistern to pan coupling bolts, doughnut washer. The universal pack contains everything required to replace all the internal cistern mechanisms in most bottom entry cisterns. Compact 99B inlet valve for small spaces, or to replace a conventional ball valve. Operating pressure from 0.5 to 10 bar. WRAS approved with a 10-year-guarantee
-
Product Description
This Doc M pack is designed to provide a toilet facility with additional support for the user. The pack is compliant with the Approved Document M of the Building Regulations 2000, is WRAS and LABC approved.
The pack contents include:
5 x 600mm Steel Grab Rails
1 x 800mm Lift & lock steel hinged Rail
1 x Close coupled WC pan & cistern assembly
1 x Ring only toilet seat with stainless hinge
1 x Two tap hole basin & fittings
1 x Basin mixer tap
1 x Spatula cistern lever
1 x TMV3 in-line thermostatic valveNote:Image shows white grab rails – finish options available in Satin or Polished Stainless Steel
-
Wall-mounted soap dish
Ref. 510627SWall-mounted soap dish.
Robust model.
For showers or washbasins.
304 Stainless steel with polished satin finish.
Stainless steel thickness: 1.5mm.
Concealed fixings. -
PREMIX COMPACT
Ref. 733020PREMIX COMPACT thermostatic mixing valve for mixed water distribution from 30 – 60°C:
For 2 to 10 sanitary points-of-use (depending on the flow rate).
Anti-scalding safety: immediate shut-off if cold or hot water supply fails.
Adjustable temperature from 30 – 60°C, can be blocked by the installer.
Brass body.
Filters and non-return valves.
Minimum flow rate to operate: 5 lpm.
Thermal shocks are possible.
M3/4″.
Nickel-plated brass with blue control cap.
10-year warranty. -
TEMPOMATIC 4 electronic tap
Ref. 44000615Deck-mounted electronic basin tap:
Battery-operated with integrated 123 6V Lithium batteries.
Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 – 6 lpm.
Scale-resistant flow straightener.
Duty flush (~60 seconds every 24 hours after last use).
Active, infrared presence detection, sensor at the end of the spout optimises detection.
Chrome-plated solid brass body.
Cap fixed in place by two concealed screws.
PEX flexible Ø 15mm for compression fittings with stopcock, filter and non-return valve.
Fixing reinforced by two stainless steel rods.
Anti-blocking security.
10-year warranty. -
SOL003
From Deva by Methven
FEATURES:
- Ultimate thermostatic performance to TMV3 standards
- Sequential flow and temperature control for ease of use
FINISH:
Chrome
CONSTRUCTION:
Brass
VALVE/CARTRIDGE TYPE:
Thermostatic
OPERATION:
Single lever flow and temperature control
SUPPLY:
Suitable for all plumbing systems
WORKING PRESSURE RANGE:
0.2 – 5.0 bar
-
Pendle Washroom Modesty Screen up to 500mm
Melamine Faced Chipboard (MFC)
The Pendle Melamine Faced Chipboard (MFC) Washroom Modesty Screen comes with wall fixing brackets and a support foot.
Enter the exact width you require when selecting
- Available in Plain Grey, White or Stone Grey
- 18mm MFC with 2mm edging
- SAA Hardware
- Wall fixing brackets
- Adjustable support leg
- Suitable for dry areas only
- Usually despatched within 3-5 working days
-
The Modular hand towel dispenser is a hard-wearing, versatile system that enables the distribution of interleaved, C-fold, Z-fold and extra-narrow towels.
Dimensions: 425x290x145mm
Weight: 1.0kg
Material: ABS cover, window & backplate
Capacity: 35omm stack -
SIAMP Back Plate 500/535 (2 x parts)
SIAMP Product code: 34013310
-
Dual flush valve WRAS and NF certified, compact and water saving. The stirrup fixes the cistern lid once the button is screwed down and enables a non alignment position. Adjustable button with optional collar.
Adjustable height from 282 and 430 mm, lid hole from 16 to 50, discharge hole from 58 to 72 mm. Adjustable : small flush, over flow, dead water level. -
Dual flush valve NF and WRAS certified, compact. 10 year guarantee. The stirrup fixes the cistern lid, once the button is screwed down and enables a non-alignment position.
Adjustable height from 305 and 455 mm, lid hole from 16 to 50, discharge hole from 58 to 72 mm. Adjustable : small flush, over flow, dead water level. -
SIAMP Moon Flush Plate
Ref: 10003609
ABS plastic, for use with SIAMP Wall frames (see below for compatibility)
Bright Chrome finish
-
Supplied with your inset type wash basin, this 2 tap-hole Vanity Basin Pack also includes:
- Soft Touch Brassware
- Basin Waste
- Bottle Trap
-
White powder-coated stainless steel, short model
Ref. 4043EWCoat hook, short model.
Tube Ø 20mm, 1 mm thick.
Concealed fixings.
White powder-coated 304 stainless steel.
Dimensions: Ø 62 x 65 x 73mm.
10-year warranty. -
TEMPOSTOP time flow tap
Ref. 746000Wall-mounted time flow basin tap:
Time flow ~7 seconds.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2″.
10-year warranty. -
Slimline toilet seat lid
Ref. 102819Toilet seat with lid.
Slimline design.
Made from Duroplast.
Colour: black.
With 304 stainless steel hinges.
For S21 and 700 WC models.
Supplied with fixing elements. -
TEMPOSOFT 2 time flow tap
Ref. 741500Wall-mounted time flow basin tap:
Soft-touch operation.
Time flow ~7 seconds.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Solid chrome-plated brass body M1/2″. L. 110mm.
Supplied with red and blue markers.
Suitable for people with reduced mobility.
10-year warranty. -
FINO wall-mounted urinal
Ref. 135710Wall-hung individual rimless urinal.
Compatible with all standard frame systems on the market.
Bacteriostatic 304 stainless steel. Polished satin finish.
Stainless steel thickness: 1.2mm.
Rear water inlet (recessed).
Recessed or exposed horizontal waste outlet. Concealed trap.
Quick and easy to install to from the front thanks to a stainless steel mounting frame.
Supplied with a 11/2″ P trap. Supplied with fixing elements.
CE marked. Complies with European standard EN 13407 for a 2 litre flush.
Weight: 3.5kg. -
TEMPOMIX 3 time flow mixer
Ref. 79400015Deck-mounted single control time flow basin mixer:
Soft-touch operation.
Temperature control and operation on the push-button.
Time flow pre-set at ~7 sec., can be adjusted from 3 to 10 sec.
Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
Tamperproof scale-resistant flow straightener.
Chrome-plated solid brass body.
PEX flexibles with stopcocks, filters, non-return valves and Ø 15mm conical inlets.
Fixing reinforced by 2 stainless steel rods.
Adjustable maximum temperature limiter.
10-year warranty. -
Recessed waterproof housing for TEMPOMATIC 4 urinal
Ref. 430PBOX
Recessed waterproof housing for electronic urinal valves, kit 1/2:
Compatible with 123 Lithium 6V battery supply.
Collar with waterproof seal.
Hydraulic connection to the outside and maintenance from the front.
Adjusts to all types of installation (rails, solid walls, panels).
Compatible with wall finishes 10 – 120mm (while maintaining the minimum recessing depth of 83mm).
Suitable for standard or “pipe in pipe” supply.
Valve configured for secure system flush without sensitive elements, and connection accessories.
Connection with Ø 35mm connection washer (for standard urinals) or ½” brass connection (for urinals supplied by flexible).
For use with neck tube 752430 or 757430.
30-year warranty. -
Recessed Control plate for TEMPOMATIC 4 for urinals
Ref. 430006
TEMPOMATIC 4 electronic valve F½”, kit 2/2.
Battery-operated with CR 123 Lithium 6V batteries.
Solenoid valve enables opening and closing of water.
Satin finish stainless steel wall plate 145 x 145mm with integrated electronics.
Shock-resistant infrared presence detection sensor.
Detection delay is 10 seconds.
3 programmes (rinsing volume can be adjusted according to urinal type).
High frequency mode (exclusive to DELABIE):
– Short rinse after each user.
– Additional rinse after the period of increased frequency of use.
Hygienic duty flush every 24 hours (can be adjusted to 12 hours or OFF) after last use: prevents vaccums.
Flow rate pre-set at 0.15 L/sec at 3 bar, can be adjusted.
TEMPOMATIC 4 F½” valve compatible with sea water, rain water and grey water.
Installation in waterproof housing with waterproof collar, transformer, filter and stopcock.
Suitable for people with reduced mobility.
10-year warranty.Order with frame system references 543006 for urinals Ø 35mm, 543006D for urinals with flexible ½” or with recessed housing 430PBOX. -
The Modular hand towel dispenser is a hard-wearing, versatile system that enables the distribution of interleaved, C-fold, Z-fold and extra-narrow towels.
Dimensions: 265 x 290 x 145mm
Weight: 0.75kg
Material: ABS cover, window & backplate
Capacity: 200mm stack -
Side entry inlet valve with 1/2″ & 3/8″ brass connection 1/2″ plastic, WRAS and NF certified and 10-year-guarantee.
Features : quiet, hydraulic closure, adjustable water level and anti-back flow. Maintenance without the need for full disassembly. Length 270mm, width 112mm, depth 50mm.
