• AQUEDUTO wall-mounted washbasin
    Ref. 120150

    Wall-mounted washbasin, 700x440mm.
    Simple and timeless design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    .Stainless steel thickness: 1.5mm
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 12kg.

    Details Quick View
  • BAILA floor-standing washbasin
    Ref. 120170

    Floor-standing washbasin, height 830mm. Basin internal diameter: 310mm.
    Design-led styling.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm.
    Rounded edges prevent injury.
    No tap hole.
    Supplied with 1 ¼” waste. Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 12kg.

    Details Quick View
  • BINOPTIC electronic tap
    Ref. 379ENC15

    Recessed electronic basin tap:
    Independent IP65 electronic control unit.
    230/12V mains supply with transformer.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 sec. every 24h after last use).
    Active, infrared movement detection, sensor at the end of the spout optimises detection.
    Filter, solenoid valve and Ø 15mm conical inlet.
    Chrome-plated solid brass body.
    Chrome-plated spout L. 200mm for recessed installation.
    Anti-blocking safety.
    Spout with a smooth interior and low water volume (limits bacterial niches).
    10-year warranty.

    Details Quick View
  • BOB TC washbasin
    Ref. 160130

    Wall-mounted washbasin with through-the-wallinstallation for service ducts.
    Basin internal diameter: 310mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    Vandal-resistant: shrouded basin.
    200mm threaded rod can be cut to size (other lengths are available on request).
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standardEN 14688.
    Weight: 5.5kg.

    Details Quick View
  • Countertop ALGUI washbasin
    Ref. 120110

    Countertop washbasin, Ø 375mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Bacteriostatic 304 stainless steel.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3.8kg.

    Details Quick View
  • FACIL wall-mounted washbasin
    Ref. 120800

    Wall-mounted washbasin, 360x390mm.
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4.1kg.

    Details Quick View
  • Floor-standing disposal sink
    Ref. 180150

    Floor-standing disposal sink.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.0mm.
    One-piece pressed bowl, seam-free.
    Smooth surface is easy to clean.
    Adjustable feet height up to 40mm.
    Supplied with 1½” waste. Without overflow.
    Hinged stainless steel bucket grid.
    Weight: 10.6kg.

    Details Quick View
  • FRAJU PMR washbasin
    Ref. 120440

    Wall-mounted washbasin, 620x505mm.
    Suitable model for people with reduced mobility.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
    Rounded edges prevent injury.
    Without tap hole.
    Supplied with 1¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 5kg.

    Details Quick View
  • FRAJU wall-mounted washbasin
    Ref. 120430
    Ref. 121430

    Wall-mounted washbasin, 540x480mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
    Rounded edges prevent injury.
    Without tap hole.
    Supplied with 1¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4.65kg.

    Details Quick View
  • HEMI inset round washbasin Ø 310mm
    Ref. 120470

    Round basin for recessed installation from above or below.
    Basin internal diameter: 310mm.
    Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.5kg.

    Details Quick View
  • HEMI inset round washbasin Ø 310mm
    Ref. 120471

    Round basin for recessed installation from above or below.
    Basin internal diameter: 310mm.
    Cut-out diameter: 330mm for installation from above, 310mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Bright polished finish.
    Stainless steel thickness: 0.8mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.5kg.

    Details Quick View
  • HEMI inset round washbasin Ø 385mm
    Ref. 120490

    Round washbasin for recessed installation from above or below.
    Basin internal diameter: 385mm.
    Cut-out diameter: 400mm for installation from above, 380mm for installation from below.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1 ¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 1.6kg.

    Details Quick View
  • MINERALCAST wash trough
    Ref. 453140

    Wall-mounted wash trough, 3 services.
    MINERALCAST: composite material consisting of natural minerals and polyester resin.
    Ideal for use in public and commercial places, especially schools.
    Uniform, non-porous surface is easy to clean.
    One-piece cast wash trough, seam-free, for easy maintenance and better hygiene.
    Warm to the touch.
    With incline to prevent water pooling.
    With central tap hole Ø 35mm.
    Supplied with three 1¼” wastes. Without overflow.
    Supplied with fixing elements.
    White, RAL 9016.
    Weight: 63kg.

    Details Quick View
  • MINIMAL corner washbasin
    Ref. 121550

    Wall-mounted corner washbasin (90° angle).
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm
    Rounded edges prevent injury.
    With Ø 35mm central tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4kg.

    Details Quick View
  • REDO wall-mounted washbasin
    Ref. 120710
    Ref. 121710

    Wall-mounted washbasin.
    Basin internal diameter: 320mm.
    Clean and simple design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

    Details Quick View
  • Semi-recessed QUADRA washbasin
    Ref. 120650

    Semi-recessed washbasin, 380x380mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Cutout diameter: 310mm.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

    Details Quick View