window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'AW-1068908279');
  • TEMPOMATIC electronic tap for sinks with BIOCLIP removable spout
    Ref. 20804T215

    Wall-mounted electronic tap with BIOCLIP spout, for mounting on panels < 20mm.
    Independent IP65 electronic control unit (integrated 230/12V transformer).
    Flow rate limited to 5 lpm at 3 bar.
    Comes with 2 removable stainless steel spouts L. 188mm Ø 28mm.
    Base and spout with smooth interiors (reduces niches where bacteria can develop).
    Adjustable duty flush (pre-set to approx. 60 secs every 24h after last use) in order to prevent water stagnation in the network in the event of prolonged periods of non-use.
    Separate sensor for mounting on panels.
    Solenoid valve Ø 15mm for compression fittings with integrated filter.
    Shock-resistant infrared presence detection sensor.
    Chrome-plated Ø 60mm brass base.
    Anti-blocking security.
    Recommended installation height: 110-200mm above the basin surface.
    Two shut-off options:
    – standard mode: timed flow with automatic shut-off.
    – ON/OFF mode: user shuts off flow voluntarily after 30 minutes.
    Thermal shocks are possible.
    10-year warranty.

  • Floor-standing janitorial unit
    Ref. 180140

    Floor-standing janitorial unit.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.0mm.
    Smooth surface for easy cleaning.
    Adjustable feet height up to 25mm.
    With tap hole Ø 35mm on right side.
    Supplied with 1 ¼” waste for washbasin and 1½” for disposal sink. Without overflow.
    Hinged stainless steel bucket grid.
    Weight: 22kg.

  • SECURITHERM thermostatic basin mixer
    Ref. H9600610

    Deck-mounted SECURITHERM sequential thermostatic basin mixer H. 85mm L. 120mm, without pop-up waste.
    Anti-scalding failsafe: hot water shuts off immediately if cold water supply fails.
    Securitouch thermal insulation prevents burns.
    No non-return valve on the inlets.
    Straight spout with a hygienic flow straightener, no build-up of impurities and withstands thermal shocks.
    Scale-resistant thermostatic sequential cartridge for single control adjustment of flow rate and temperature.
    Adjustable temperature from cold water up to 40°C with maximum temperature limiter set at 40°C and the option to carry out thermal and chemical shocks.
    Spout and body with smooth interiors and low water volume.
    Flow rate regulated at 7 lpm.
    No manual contact thanks to Hygiene control lever L. 146mm.
    Supplied with copper tails and stopcocks in chrome-plated brass Ø 15mm.
    Reinforced fixing via 2 stainless steel rods.
    10-year warranty.

  • Countertop ALGUI washbasin
    Ref. 120110

    Countertop washbasin, Ø 375mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Bacteriostatic 304 stainless steel.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3.8kg.

  • Wall-mounted SD drinking fountain
    Ref. 180800

    Wall-mounted drinking fountain.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Rounded edges prevent injury.
    Supplied with bubbler tap: chrome-plated, instant shut-offand adjustable flow rate, inlet M3/8″.
    Flat perforated waste, without screws:easy to clean and vandal-resistant.
    Recessed horizontal water outlet.
    Waste outlet 1¼” trap.
    Supplied with fixing elements.Weight: 2.4kg.

  • BAILA floor-standing washbasin
    Ref. 120170

    Floor-standing washbasin, height 830mm. Basin internal diameter: 310mm.
    Design-led styling.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 0.8mm.
    Rounded edges prevent injury.
    No tap hole.
    Supplied with 1 ¼” waste. Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 12kg.

  • AQUEDUTO wall-mounted washbasin
    Ref. 120150

    Wall-mounted washbasin, 700x440mm.
    Simple and timeless design.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    .Stainless steel thickness: 1.5mm
    Rounded edges prevent injury.
    With no tap hole.
    Supplied with 1 ¼” waste.
    Without overflow.
    Supplied with brackets and fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 12kg.

  • Semi-recessed QUADRA washbasin
    Ref. 120650

    Semi-recessed washbasin, 380x380mm.
    Suitable for use with wall-mounted or extended mixer/tap.
    Basin internal diameter: 310mm.
    Cutout diameter: 310mm.
    Stainless steel thickness: 1.2mm.
    Polished satin finish.
    Stainless steel thickness: 1.2mm.
    One-piece, seam-free pressed bowl.
    Rounded edges prevent injury.
    Supplied with 1¼” waste.
    Without overflow.
    CE marked. Complies with European standard EN 14688.
    Weight: 3kg.

  • TEMPOSTOP shower kit
    Ref. 749159

    Cross wall time flow shower kit:
    TEMPOSTOP M1/2″ time flow valve for mixed water supply.
    For walls ≤ 150mm.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
    Chrome-plated solid brass.
    Concealed fixings and anti-rotating nut.
    Threaded rods can be cut to size.
    10-year warranty.

  • TEMPOMIX shower kit
    Ref. 796209

    Time flow shower kit for cross wall installation:
    TEMPOMIX 3/4″ single control mixer.
    For walls ≤ 220mm.
    Temperature control and operation via the push-button.
    Maximum temperature limiter (adjustable by the installer).
    Ligature-resistant collar.
    Soft-touch operation.
    Time flow ~30 seconds.
    Flow rate 6 lpm at 3 bar.
    Chrome-plated ROUND shower head, tamperproof with scale-resistant nozzle and automatic flow rate regulation.
    Integrated non-return valves and filters.
    Chrome-plated metal push-button.
    Threaded rods can be cut-to-size.
    10-year warranty.

  • FINO wall-hung urinal
    Ref. 135110

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed horizontal or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with a 1½” P trap. Supplied with fixing elements.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 3.5kg.

  • Delabie FRAJU Wall-Mounted Washbasin

    £311.00£311.10 ex VAT

    FRAJU wall-mounted washbasin
    Ref. 120430
    Ref. 121430

    Wall-mounted washbasin, 540x480mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness: 1.2mm for the bowl and 1.5mm for surround.
    Rounded edges prevent injury.
    Without tap hole.
    Supplied with 1¼” waste.
    Without overflow.
    Supplied with fixing elements.
    CE marked. Complies with European standard EN 14688.
    Weight: 4.65kg.

  • TEMPOMATIC shower kit
    Ref. 452159

    Cross wall electronic shower kit:
    TEMPOMATIC electronic valve for mixed water supply.
    For walls ≤ 155mm.
    Power supply by electronic unit with solenoid valve 1/2″.
    230/12V transformer.
    2 operation modes:
    – Automatic activation via presence detection.
    – Voluntary ON/OFF activation by passing the hand in front of sensor ~10 cm.
    Duty flush (~60 seconds every 24 hours after the last use).
    Adjustable time flow from 30 to 60 seconds.
    Flow rate set at 6 lpm at 3 bar.
    Chrome-plated, tamperproof, scale-resistant ROUND shower head with automatic flow rate regulation.
    Chrome-plated solid brass.
    Wall plate flush to the wall.
    Threaded rods can be cut-to-size.
    10-year warranty.

  • DELTA wall-hung urinal
    Ref. 134170

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  • Wall-hung DELTA urinal
    Ref. 134710

    Wall-hung individual rimless urinal.
    Compatible with all standard frame systems on the market.
    Bacteriostatic 304 stainless steel. Polished satin finish.
    Stainless steel thickness: 1.2mm.
    Top (exposed) water inlet.
    Recessed or exposed waste outlet. Concealed trap.
    Quick and easy to install from the front thanks to a stainless steel mounting frame.
    Supplied with 1½” P trap, fixing elements and theft prevention TORX security screws.
    CE marked. Complies with European standard EN 13407 for 2L flush.
    Weight: 7.5kg.

  • SHA 700 squat WC pan
    Ref. 113610

    Floor-recessed squat WC pan, 700 x 220 x 700mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Weight: 6kg.10-year warranty.

  • SHA XS squat WC pan
    Ref. 113710

    Floor-recessed squat WC pan, 500 x 220 x 600mm.
    Bacteriostatic 304 stainless steel.
    Polished satin finish.
    Stainless steel thickness 1.2mm.
    One-piece pressed WC bowl, seam-free for easy maintenance and better hygiene.
    Bowl shape suitable for male and female use.
    Non-slip foot area.
    Vertical waste outlet: Ø 100mm.
    Flushing system with one 304 stainless steel spreader.
    Weight: 5kg.
    10-year warranty.

  • TEMPOMATIC 4 electronic tap
    Ref. 44000015

    Deck-mounted electronic basin tap:
    230/6V recessed mains supply.
    Reduced stagnation solenoid valve and electronic unit integrated into the body of the tap.
    Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1.5 to 6 lpm.
    Scale-resistant flow straightener.
    Duty flush (~60 sec. every 24h after last use).
    Active, infrared presence detection, sensor at the end of the spout optimises detection.
    Chrome-plated solid brass body.
    Cap fixed in place by two concealed screws.
    PEX flexible with stopcock, filter and Ø 15mm conical inlet.
    Fixing reinforced by 2 stainless steel rods.
    Anti-blocking safety.
    10-year warranty.

  • Be-line lift-up shower seat
    Ref. 511920C

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
    Non-slip surface.
    Metallised anthracite powder-coated aluminium provides a good visual contrast with the wall.
    Solid aluminium mounting bracket.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 455 x 450 x 90mm.
    Folded dimensions: 85 x 470mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

  • Be-line lift-up shower seat
    Ref. 511920W

    Be-line removable lift-up shower seat for people with reduced mobility.
    Large model.
    Removable: easy to remove with anti-theft locking system. Reduces the number of shower seats in a facility, allowing installation only when required e.g. hotels or hospitals providing short-term accommodation for people with reduced mobility.
    Retained in upright position. Slowed down descent.
    Suitable for intensive use in public places or the healthcare sector.
    Solid, reinforced seat made from high strength polymer which can be installed, without a supporting leg, on any suitable wall.
    Non-slip surface.
    Matte white powder-coated aluminium provides a good visual contrast with the wall.
    Solid aluminium mounting bracket.
    5 concealed fixing points.
    Supplied with stainless steel screws Ø 8 x 70mm for concrete walls.
    Dimensions: 455 x 450 x 90mm.
    Folded dimensions: 83 x 470mm.
    Tested to over 200kg. Maximum recommended user weight: 135kg.
    10-year warranty. CE marked.

Title

Go to Top